Welding up holes and making plugs, need advice

Print Thread

Re: Welding up holes and making plugs, need advice [Re: moparpollack] #1916377 09/20/15 10:50 PM 09/20/15 10:50 PM
Joined: Aug 2003 Posts: 18,575 Dreaming of the 808 AZ_A12_BEE OP I Live Here
AZ_A12_BEE OP I Live Here Joined: Aug 2003 Posts: 18,575 Dreaming of the 808	Originally Posted By moparpollack Turn up the wire speed and burn the holes shut. You are lucky the panel is off the car it will be much easier! Shows how rust free the truck is, only broke 1 bolt off and I just drilled an tapped it back out to 1/4-20 69.5 A12 Bee, first purchased in 1976, car 169 on registry 69 Coronet R/T 440/4 spd 69 Coronet 500 Conv H code 383 4bbl/auto 37 Plymouth PU Find your spot on earth and ride it.

Entire Thread
Subject	Posted By	Posted
Welding up holes and making plugs, need advice	AZ_A12_BEE	09/20/15 08:22 AM
Re: Welding up holes and making plugs, need advice	John_Kunkel	09/20/15 09:36 PM
Re: Welding up holes and making plugs, need advice	wannadrag	09/20/15 11:01 PM
Re: Welding up holes and making plugs, need advice	Supercuda	09/21/15 12:29 AM
Re: Welding up holes and making plugs, need advice	Crizila	09/20/15 11:35 PM
Re: Welding up holes and making plugs, need advice	moparpollack	09/20/15 11:52 PM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	09/21/15 02:50 AM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	09/21/15 02:51 AM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	09/21/15 02:54 AM
Re: Welding up holes and making plugs, need advice	moparpollack	09/21/15 03:11 AM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	09/21/15 04:47 AM
Re: Welding up holes and making plugs, need advice	Crizila	09/21/15 05:38 AM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	09/29/15 06:30 AM
Re: Welding up holes and making plugs, need advice	rowin4	11/01/15 10:15 PM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	11/22/15 03:53 AM

Hop To