Welding up holes and making plugs, need advice

Print Thread

Re: Welding up holes and making plugs, need advice [Re: AZ_A12_BEE] #1916259 09/20/15 07:35 PM 09/20/15 07:35 PM
Joined: Oct 2003 Posts: 7,506 Az Crizila master
Crizila master Joined: Oct 2003 Posts: 7,506 Az	.023 wire. Machine screw flat washers on some, but with that many holes to fill, why don't you just cut a new panel and weld it to the hump area? Gonna be a lot of work to make it flat. Fastest 300

Entire Thread
Subject	Posted By	Posted
Welding up holes and making plugs, need advice	AZ_A12_BEE	09/20/15 08:22 AM
Re: Welding up holes and making plugs, need advice	John_Kunkel	09/20/15 09:36 PM
Re: Welding up holes and making plugs, need advice	wannadrag	09/20/15 11:01 PM
Re: Welding up holes and making plugs, need advice	Supercuda	09/21/15 12:29 AM
Re: Welding up holes and making plugs, need advice	Crizila	09/20/15 11:35 PM
Re: Welding up holes and making plugs, need advice	moparpollack	09/20/15 11:52 PM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	09/21/15 02:50 AM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	09/21/15 02:51 AM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	09/21/15 02:54 AM
Re: Welding up holes and making plugs, need advice	moparpollack	09/21/15 03:11 AM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	09/21/15 04:47 AM
Re: Welding up holes and making plugs, need advice	Crizila	09/21/15 05:38 AM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	09/29/15 06:30 AM
Re: Welding up holes and making plugs, need advice	rowin4	11/01/15 10:15 PM
Re: Welding up holes and making plugs, need advice	AZ_A12_BEE	11/22/15 03:53 AM

Hop To