Im in the process of converting my little street strip valiant over from a e85 turbo slant that i was pushing 20 pounds of boost.
New combo will consist of a 470 low deck
3.75 stroke crank regrind to 3.915 stroke 2.2 chevy rods size RB mains
BCR billet main caps and gridle setup
Callies ultra h beam 5.535 rods
No pistons yet!!!
Bullet billet roller cam
440-1 heads no port work
Harland Sharp 1.6 rockers
Low deck indy intake 4150 flange
I just did a partial fill on the block and letting it set for a couple more weeks before i take the block in for final machine work
I havent decided what direction im going with a transmission yet im kind of leaning toward a powerglide but that decision isnt set in stone.. The car has all the best for a boosted car so there will only need some minor changes but im looking to have the car ready for next year. I just received most of my bends and flanges for my headers but thats a long process building a set of headers.
Not sure where it will end up with a boost number only time will tell
Ill keep everyone updated
Aaron