I used 2 jackstands in the back as a pivot. I balanced it so you can pick up the front by hand. I used a cherry picker and a pallet jack for the engine. The pallet jack was great because it was so low and it was easy to move the engine plus I didn't have to raise the car that high. I used the bumper mounts with chains. You have to position them so you don't hit any part of the front radiator frame. I installed the headers,transmision, alternator and powersteering pump. I lowered the car down and raised the K member with the pallet jack. Done 2 cars this way. Both small blocks and even stored the engine under. The pallet jack is the best....