Quote:

thanks for the help. I did spin the T Q to make sure it was in all the way. It seems to fit, I just didn't like the drive lugs(?) were a different size. Both engines are cast, but the 400 damper is thinner than the 440...
So should i cut the weights off the 440 T Q or... let it roll as is ....


Unless someone has put a 383 crank in the 400 it should need a external balanced converter. Not sure if it takes the same weights as a 440 though.

Clean it, if it's Dirty. Oil it, if it Squeaks. But: Don't fix it, if it Works!