Quote:
Don't you have to get a reamer for tubing? its not in that kit.
I would give them a call. I made up my own kit using 1/2 inch copper house pipe (10 inches long), an old rounded off solid lifter to peen the tube, and had a long drill bit made-up. Probably get a long drill bit now on ebay or Ace Hardware but I made mine 38 years ago. DON"T FORGET TO REDRILL OIL FEED HOLES.
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|