Quote:

---

Quote:

---

just curious what everyone is using on street.pump gas 340 stroker, are u using pressure fed rollers or non pressure fed rollers.crane solid roller .250/.254@.050 .600/.600 lift installed at 109.

---

I use the EDM lifters in my street/strip 416 but
I also use PR oiling.. I also have bushed lifter
bores... if you look at the rollers you have.. see
if there is a hole in the side... my one set does
and that hole oils the roller(blow through it just
to check, if you have it).. I went with the EDM just
so I can run lower RPM at the street lights.. its
a .640/.640 260/270 105 lsa installed at 105 with 260#
on seat

---