Quote:

No they did not make a mistake. If anything they improved the design of that can. It is to allow the fluid to drain back into the the transmission pan. Mount it higher than the vent on the trans, leave the valve open and allow it to work the way it is designed to.

I made my own from an aluminum water bottle from the 99 cent store. Mounted way up inside right fender and installed hose fitting on bottom and vented up top. No valve. Any fluid that enters, drains back automatically. Don't have to worry bout draining tank or low fluid in trans. I forget it's there and no more leaky vent at the big end.

8197619-tcc.png (45 downloads)
Sworn Member Central Valley MoPar Drag Pack. You can reach me at (done-et-chasing@going-rounds.gone)... :-)

[img]https://s6.postimg.org/v3mbggksx/SAC16.jpg[/img]image hosting more than 5mb