The intake rocker arms have the same offset as the exhaust rocker arms. Jesel does not sell a kit like this so you have to special order it. No big deal, just ask for 16 exhaust rocker arms.

The guys at Indy won't sell the EZ head with Jesel rocker arms so you have to have Jeff at Modern buy bare castings from Indy and finish them. But once again, not a big deal you just have to know what you want to who to buy it from.

While we're on the subject of rocker arms, last time this motor was on the dyno it burned up the pushrods due to poor oiling on the top end. I fixed that by getting the new roller lifters from OU812 and using pushrod oiling. The pushrods looked perfect after the dyno tests so I think I solved that particular issue.