Rocker arm geometry on a 440

Print Thread

Re: Rocker arm geometry on a 440 [Re: JohnRR] #1414020 04/03/13 12:48 PM 04/03/13 12:48 PM
Joined: Aug 2009 Posts: 1,318 Ohio J jlatessa pro stock
jlatessa pro stock J Joined: Aug 2009 Posts: 1,318 Ohio	I'm not sure that shimming will make it worse, take it to the extreme i.e. if you shimmed it an inch, the arc of the tip would be passing the valve on the inside, or is my reasoning wrong?? Joe

Entire Thread
Subject	Posted By	Posted
Rocker arm geometry on a 440	moparguy	04/03/13 02:32 AM
Re: Rocker arm geometry on a 440	rickraw	04/03/13 02:38 AM
Re: Rocker arm geometry on a 440	gregsdart	04/03/13 04:41 AM
Re: Rocker arm geometry on a 440	JohnRR	04/03/13 03:00 PM
Re: Rocker arm geometry on a 440	jlatessa	04/03/13 04:48 PM
Re: Rocker arm geometry on a 440	JohnRR	04/03/13 05:06 PM
Re: Rocker arm geometry on a 440	jlatessa	04/03/13 05:17 PM
Re: Rocker arm geometry on a 440	jlatessa	04/03/13 05:33 PM
Re: Rocker arm geometry on a 440	JohnRR	04/03/13 05:44 PM
Re: Rocker arm geometry on a 440	tsanchez	04/03/13 05:52 PM
Re: Rocker arm geometry on a 440	AndyF	04/03/13 07:56 PM
Re: Rocker arm geometry on a 440	AAR-B4	04/03/13 08:55 PM
Re: Rocker arm geometry on a 440	Stanton	04/03/13 09:58 PM
Re: Rocker arm geometry on a 440	tsanchez	04/03/13 10:20 PM
Re: Rocker arm geometry on a 440	1KoolBee	06/09/13 12:55 AM
Re: Rocker arm geometry on a 440	polyspheric	06/09/13 10:34 PM
Re: Rocker arm geometry on a 440	moparguy	06/10/13 03:38 AM
Re: Rocker arm geometry on a 440	70satelliteguy	04/03/13 09:56 PM
Re: Rocker arm geometry on a 440	Thumperdart	04/03/13 05:18 AM
Re: Rocker arm geometry on a 440	big_wedge	04/03/13 10:05 AM
Re: Rocker arm geometry on a 440	'72CudaRacer	04/03/13 02:39 AM
Re: Rocker arm geometry on a 440	moparguy	04/03/13 02:57 AM
Re: Rocker arm geometry on a 440	AAR-B4	04/03/13 03:02 AM
Re: Rocker arm geometry on a 440	skrews	04/03/13 03:16 AM
Re: Rocker arm geometry on a 440	StealthWedge67	04/03/13 03:24 AM
Re: Rocker arm geometry on a 440	moparguy	04/03/13 03:25 AM
Re: Rocker arm geometry on a 440	JohnRR	04/03/13 03:44 AM
Re: Rocker arm geometry on a 440	AndyF	04/03/13 07:48 PM
Re: Rocker arm geometry on a 440	polyspheric	04/03/13 10:36 PM
Re: Rocker arm geometry on a 440	AndyF	04/04/13 12:42 AM
Re: Rocker arm geometry on a 440	Stanton	04/04/13 03:35 AM
Re: Rocker arm geometry on a 440	AndyF	04/04/13 05:28 PM
Re: Rocker arm geometry on a 440	CSK	04/04/13 06:57 PM
Re: Rocker arm geometry on a 440	JohnRR	04/04/13 08:03 PM
Re: Rocker arm geometry on a 440	AndyF	04/04/13 09:37 PM
Re: Rocker arm geometry on a 440	shoebox	04/07/13 03:21 AM
Re: Rocker arm geometry on a 440	70satelliteguy	04/07/13 02:25 PM
Re: Rocker arm geometry on a 440	gregsdart	04/07/13 02:39 PM
Re: Rocker arm geometry on a 440	1_WILD_RT	04/07/13 07:49 PM
Re: Rocker arm geometry on a 440	1_WILD_RT	04/07/13 07:55 PM
Re: Rocker arm geometry on a 440	JohnRR	04/08/13 03:25 PM
Re: Rocker arm geometry on a 440	Jerry	04/08/13 03:34 PM
Re: Rocker arm geometry on a 440	VernMotor	04/08/13 03:46 PM
Re: Rocker arm geometry on a 440	BradH	04/08/13 04:43 PM
Re: Rocker arm geometry on a 440	Stanton	04/08/13 06:53 PM
Re: Rocker arm geometry on a 440	1_WILD_RT	04/09/13 04:25 AM
Re: Rocker arm geometry on a 440	dogdays	04/04/13 05:33 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To