|
Re: interesting 5.9 magnum cam info
[Re: turboking15]
#1397087
03/05/13 05:42 AM
03/05/13 05:42 AM
|
Joined: May 2008
Posts: 5,399 Aurora, Colorado
451Mopar
master
|
master
Joined: May 2008
Posts: 5,399
Aurora, Colorado
|
Quote:
Numbers i got: lobe lift - .275/.279 valve lift with 1.6rr - .440/.446 approximate lsa - 112 duration - still only have the 249/269(no way to check)
Put the cam back in the block with the crank and timing chain (don't even need a piston for duration.) zero out dial indicator on base of cam, with a degree wheel on the crank rotate till you get 0.006" lobe lift, record degree wheel #, rotate past max lift to 0.006" and record degree #, find the degrees between the first and second recorded numbers and you have advertised duration. Repeat using 0.050" lobe lift if you want the 0.050" duration numbers. If yo have a way to attach the degree wheel to the cam, you could do this without a crank/timing set, but the duration would be in can degrees, so you would need to double it to get crank degrees.
|
|
|
|
|
|