Well....I though my picture had a note attached. Anyway...it's a 80 volare' hose with a 76 Dart caliper. You can see how low the bleeder is. The 80 Volare caliper has it's bleeder higher up and all I had to do, once I changed out the caliper, was gravity bleed the system to get a hard brake pedal. Brake pumping nor gravity would give a hard pedal with the 76 Dart calipers, as shown in the picture.

Now..if you don't plan on using a swaybar setup, you can just keep the spindles in their original positions so the calipers face forward, use 73 single piston calipers, hoses, etc. I also believe if you even plan to run an aftermarket swaybar on your setup, later on...you'll still need to mount the calipers rearward.