good drill size to prime a big block

Print Thread

Re: good drill size to prime a big block [Re: RapidRobert] #1311134 09/28/12 01:29 PM 09/28/12 01:29 PM
Joined: Jul 2006 Posts: 4,179 California mickm OP master
mickm OP master Joined: Jul 2006 Posts: 4,179 California	Quote: Keep it all in the same thread! Dont button it up till you get the other side squared away. with full time oiling there's no reason both sides shouldn't be recieving oil. I'd continue to prime it & if need be take off the rocker assy & see if the pedestal has psi (as you know cover it with something). I'm assuming the cam is gooped and the intake is on so you wouldn't want to do alot of hand turning which you shouln't need anyhow. I'd continue to drill prime it & maybe toss in another qt (can drain the qt before firing to get the level right) & if the drill has enough oats to prime one side then it's enough for the other side. it's a roller cam, so no issue there. i'll do all that this weekend and post back. thanks!

Entire Thread
Subject	Posted By	Posted
good drill size to prime a big block	mickm	09/26/12 09:49 PM
Re: good drill size to prime a big block	Twostick	09/26/12 09:59 PM
Re: good drill size to prime a big block	Dodgem	09/26/12 10:03 PM
Re: good drill size to prime a big block	Challenger 1	09/26/12 10:13 PM
Re: good drill size to prime a big block	dogdays	09/26/12 11:38 PM
Re: good drill size to prime a big block	bobs66440	09/26/12 11:57 PM
Re: good drill size to prime a big block	sthemi	09/27/12 12:03 AM
Re: good drill size to prime a big block	Challenger 1	09/27/12 12:35 AM
Re: good drill size to prime a big block	Exit1965	09/27/12 01:08 AM
Re: good drill size to prime a big block	RapidRobert	09/27/12 03:38 AM
Re: good drill size to prime a big block	AndyF	09/27/12 03:41 AM
Re: good drill size to prime a big block	Dodgem	09/27/12 03:51 AM
Re: good drill size to prime a big block	Cab_Burge	09/27/12 04:23 AM
Re: good drill size to prime a big block	therocks	09/27/12 12:06 PM
Re: good drill size to prime a big block	JohnRR	09/27/12 01:23 PM
Re: good drill size to prime a big block	Challenger 1	09/27/12 12:58 PM
Re: good drill size to prime a big block	446acuda	09/27/12 04:16 PM
Re: good drill size to prime a big block	Von	09/27/12 05:07 PM
Re: good drill size to prime a big block	mickm	09/27/12 06:59 PM
Re: good drill size to prime a big block	446acuda	09/27/12 08:26 PM
Re: good drill size to prime a big block	Fury Fan	09/27/12 09:15 PM
Re: good drill size to prime a big block	383man	09/27/12 09:05 PM
Re: good drill size to prime a big block	mickm	09/27/12 10:14 PM
Re: good drill size to prime a big block	RapidRobert	09/27/12 11:38 PM
Re: good drill size to prime a big block	mickm	09/28/12 04:32 AM
Re: good drill size to prime a big block	RapidRobert	09/28/12 05:03 AM
Re: good drill size to prime a big block	mickm	09/28/12 06:55 AM
Re: good drill size to prime a big block	bigblockbryan	09/28/12 09:24 AM
Re: good drill size to prime a big block	buildanother	09/28/12 02:04 PM
Re: good drill size to prime a big block	RapidRobert	09/28/12 02:54 PM
Re: good drill size to prime a big block	mickm	09/28/12 05:29 PM
Re: good drill size to prime a big block	mickm	09/30/12 10:48 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To