good drill size to prime a big block

Print Thread

Re: good drill size to prime a big block [Re: AndyF] #1311115 09/26/12 11:51 PM 09/26/12 11:51 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	Quote: No need for a drill, just use a speed wrench and turn it by hand. You only need to spin the wrench a few times to build up the oil pressure. God did not invent power tools so we could use manual tools! As tim says Ya need more power!

Entire Thread
Subject	Posted By	Posted
good drill size to prime a big block	mickm	09/26/12 09:49 PM
Re: good drill size to prime a big block	Twostick	09/26/12 09:59 PM
Re: good drill size to prime a big block	Dodgem	09/26/12 10:03 PM
Re: good drill size to prime a big block	Challenger 1	09/26/12 10:13 PM
Re: good drill size to prime a big block	dogdays	09/26/12 11:38 PM
Re: good drill size to prime a big block	bobs66440	09/26/12 11:57 PM
Re: good drill size to prime a big block	sthemi	09/27/12 12:03 AM
Re: good drill size to prime a big block	Challenger 1	09/27/12 12:35 AM
Re: good drill size to prime a big block	Exit1965	09/27/12 01:08 AM
Re: good drill size to prime a big block	RapidRobert	09/27/12 03:38 AM
Re: good drill size to prime a big block	AndyF	09/27/12 03:41 AM
Re: good drill size to prime a big block	Dodgem	09/27/12 03:51 AM
Re: good drill size to prime a big block	Cab_Burge	09/27/12 04:23 AM
Re: good drill size to prime a big block	therocks	09/27/12 12:06 PM
Re: good drill size to prime a big block	JohnRR	09/27/12 01:23 PM
Re: good drill size to prime a big block	Challenger 1	09/27/12 12:58 PM
Re: good drill size to prime a big block	446acuda	09/27/12 04:16 PM
Re: good drill size to prime a big block	Von	09/27/12 05:07 PM
Re: good drill size to prime a big block	mickm	09/27/12 06:59 PM
Re: good drill size to prime a big block	446acuda	09/27/12 08:26 PM
Re: good drill size to prime a big block	Fury Fan	09/27/12 09:15 PM
Re: good drill size to prime a big block	383man	09/27/12 09:05 PM
Re: good drill size to prime a big block	mickm	09/27/12 10:14 PM
Re: good drill size to prime a big block	RapidRobert	09/27/12 11:38 PM
Re: good drill size to prime a big block	mickm	09/28/12 04:32 AM
Re: good drill size to prime a big block	RapidRobert	09/28/12 05:03 AM
Re: good drill size to prime a big block	mickm	09/28/12 06:55 AM
Re: good drill size to prime a big block	bigblockbryan	09/28/12 09:24 AM
Re: good drill size to prime a big block	buildanother	09/28/12 02:04 PM
Re: good drill size to prime a big block	RapidRobert	09/28/12 02:54 PM
Re: good drill size to prime a big block	mickm	09/28/12 05:29 PM
Re: good drill size to prime a big block	mickm	09/30/12 10:48 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To