Quote:

Those plates are about $7 at O'rielly's or autozone IIRC.

They tend to get "lost"...

That 1" spacer may do the same, however, it introduces other potential issues. Get that plate #2732 and try again.

Reset the carb idle mix screws to 1.5 turns out. If you get the plate on, the idle should increase a bunch because your leak should be gone.




Thanks man.... I'll give that a shot. Thanks for putting up with all my stupid questions and problems.. this is completely new to me. I'm not an "engine tuning" guy... I went to school for body/paint work