Quote:

I did something close for a customer with a 65 Belvedere.
493 Hemi,4.350x4.150, 11to1 Compressiion,Stage V heads and rockers,MP crossram with original 770 Holleys and a 262 @ .050 solid roller for a street/strip car on pump gas it made 710hp @ 6500,torque curve was 580 @ 3000 to a peak of 632 @ 4700 and still has 580 @ 6500. Spring pressure is 200 on the seat and 600 over the nose with a Crower lifter with the axle and pushrod oiling.



Can you post the cam card? Sounds close to what I am looking for...Funny thing is, there was a Crower in the engine before I stroked it, and it looks like I am headed right back to it.

Here is my old one:
http://www.crower.com/mopar-426-hemi-66-71-street-roller-cam-298-r-8620-billet.html

We were looking around the shop hoping to find it. Guess we will keep looking

Last edited by Dragula; 03/11/12 03:45 PM.
'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk