I'm getting too old to lay on the floor for an underside picture, so here's the best I could do this morning.

We'd a bit of a debate going on regarding the trunk floor. There are a few pinholes mostly on the right side. Some are above the right frame rail, forward of where the leaf spring shackle mount is. He wants to cut out and replace the section because he feels the sheet metal may be a bit thin there and doesn't want to take a chance on it becoming an issue down the road.

My immediate reaction was to leave it alone, but then thought better of it. He wants to do it the way he feels is best and I sure don't want to dampen the enthusiasm, so I told him to proceed as he sees fit.