Quote:
on a 500ci motor
how much hp would the B1s compare to a set of indy cnc 345s be and 800 lift
I short thread hijack.....
Im not sure yet Ari
I will let you know...
Old Combo
493 with 12:1 compression fully cnc'd 440-1's with 375-380 cfm at .800
Cam was a PRH .790 Roller.
Pretty basic combo, back then there wasnt all these crank and rod choices. It was a eagle crank with eagle rods. Indy Single plane, and Dominator.
The truck weighed about 3300 lbs with driver and ran 9.60's 9.70's. Id say it made a true 700hp Id say, maybe less maybe more.
Pretty much same basic parts, single plane intake, similar cam specs, same basic engine low deck Vs tall deck..The low deck has a Billet crank and aluminum rods however. A hair more bore diameter 4.375 vs 4.350 for the low deck. Indy engine had 1.7 Jesel paired rockers vs Low decks 1.75.. Only major factor is the compression which will be several points more in the low deck.
So how much better will it run? Substantially, My guess. With the better parts, more flow, lighter reciprocating weight, and a considerable jump in compression??
[color:"red"]65 Hemi Belvedere coming soon [/color]
[color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]
| 
