Quote:

Quote:

Quote:

Quote:

The Jaguar fan clutch, Hayden part number 2765, is 2.67" tall and SHOULD come with a bushing for the center pin. I installed it on my 1971 383 which fit just like it should. Bolted right up. No problems.

No machining required.



Just put one in myself.



Me three.

I just bought one about a month ago and it came with the bushing. It bolted up perfectly to the Mopar fan that I had.

Here's a quick pic of it installed:


Whats the measurement from the core to the fan clutch, in the picture it looks real close.
Anyone else with pics and measurements PLEASE post them



It would NOT fit with the stock radiator location. I had the local radiator shop move the side brackets back about 1/2".

Before it would slip in but was up against the radiator.

Now it has about 1/2" clearance although getting a good pic is difficult.

6779602-fanII.JPG (334 downloads)