Quote:

---

I had the same result as Cudafied.......twice . I was probably making something around 725 to 750 hp then.

In 2003 I bucked up and bought a new Megablock, Callies crank, aluminum rods, and Wiseco pistons. (I already had 440-1 heads with Jesel rockers)I have many hundreds of runs on these parts and not one single failure yet.

If I had just started with the good parts I would have avoided 2 engine failures, a lot of work, a lot of down time, and been WAY ahead.

---

The best advice is personal experience.