Threads Created By tuff440

Threads Created \| All Posts Threads Created By tuff440
Title	Forum	Post Time
Off set grinding a cast 440 crank.	Unlawfl's Race & Engine Tech	08/03/20 01:43 AM
R3 50mm can tunnel	Unlawfl's Race & Engine Tech	02/21/20 08:51 AM
W2 59' valve train help	Unlawfl's Race & Engine Tech	07/03/19 10:26 AM
Engine choice for daily driver dually pickup	Unlawfl's Race & Engine Tech	11/23/18 10:17 AM
A518 trans	Unlawfl's Race & Engine Tech	02/07/18 11:32 PM
Die Grinder recommendations for porting	Unlawfl's Race & Engine Tech	08/23/16 10:55 AM
5/16 pushrods with performer rpm springs	Unlawfl's Race & Engine Tech	08/05/13 01:51 PM
440 Intake manifold gasket	Unlawfl's Race & Engine Tech	07/25/13 12:02 PM
BB EDDY PERFORMER RPM's	Unlawfl's Race & Engine Tech	06/20/13 02:03 PM
Comp with eddy rpm's and L2355's	Unlawfl's Race & Engine Tech	06/12/13 01:30 PM
360-2's on a 48 degree block	Unlawfl's Race & Engine Tech	02/10/12 03:57 PM
Predator vs B1TS	Unlawfl's Race & Engine Tech	05/30/11 02:14 PM
offset small block lifters	Unlawfl's Race & Engine Tech	10/13/10 11:38 AM
early hemi cranks	Unlawfl's Race & Engine Tech	08/27/10 08:35 AM
Oddy billet 440 heads	Unlawfl's Race & Engine Tech	05/30/10 11:24 AM
Indy 360-2 which arp studs	Unlawfl's Race & Engine Tech	05/27/10 09:04 AM
400 block weight	Unlawfl's Race & Engine Tech	04/21/10 11:46 AM
Screwed by Mancini	Unlawfl's Race & Engine Tech	11/08/09 10:45 AM
509 cam	Unlawfl's Race & Engine Tech	09/20/09 10:29 AM
magnum force or rms alterkation kit	Unlawfl's Race & Engine Tech	08/02/09 11:34 AM

Page 1 of 2