|
|
|
Re: Anyone run Ford TFI coil+HEI module with mopar distributor?
[Re: mopower440]
#2661848
06/03/19 11:58 AM
06/03/19 11:58 AM
|
Joined: Jan 2003
Posts: 18,070
S.E. Michigan
ZIPPY
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2003
Posts: 18,070
S.E. Michigan
|
The 4 pin module is really the one to use with this basic swap, where you're carbureted and are controlling advance with a mopar distributor.
I have not researched this to death and don't feel I know all the ins and outs of it, but I believe the 7 pin or 8 pin module is still useful...
I believe it is the one you want to use with EFI/megasquirt with the computer providing spark control.
Last edited by ZIPPY; 06/03/19 12:24 PM.
Rich H.
Esse Quam Videri
|
|
|
Re: Anyone run Ford TFI coil+HEI module with mopar distributor?
[Re: mopower440]
#2669990
06/25/19 09:36 PM
06/25/19 09:36 PM
|
Joined: Jan 2003
Posts: 1,823
North Dakota
Azzkikrcuda
top fuel
|
top fuel
Joined: Jan 2003
Posts: 1,823
North Dakota
|
If you like to mount the module off the distributor like I do to get it away from some heat. Try this bracket, AC Delco #10474610. Just drill 2 new holes and it works great and is under $20.
The only Carbs I care about are under the hood!
|
|
|
Re: Anyone run Ford TFI coil+HEI module with mopar distributor?
[Re: Azzkikrcuda]
#2670075
06/26/19 07:17 AM
06/26/19 07:17 AM
|
Joined: Jan 2003
Posts: 2,863
middle Tennessee
mopower440
master
|
master
Joined: Jan 2003
Posts: 2,863
middle Tennessee
|
If you like to mount the module off the distributor like I do to get it away from some heat. Try this bracket, AC Delco #10474610. Just drill 2 new holes and it works great and is under $20. I like that!
|
|
|
Re: Anyone run Ford TFI coil+HEI module with mopar distributor?
[Re: mopower440]
#2670082
06/26/19 07:43 AM
06/26/19 07:43 AM
|
Joined: Aug 2009
Posts: 1,325
Ohio
jlatessa
pro stock
|
pro stock
Joined: Aug 2009
Posts: 1,325
Ohio
|
You can mount the module on the back of the heat sink and not have to drill any extra holes.
Used long through-screws to get the necessary clearance for mounting to fender housing.
Joe
PS, don't forget the paste for heat transfer
Last edited by jlatessa; 06/26/19 07:44 AM.
|
|
|
Re: Anyone run Ford TFI coil+HEI module with mopar distributor?
[Re: Azzkikrcuda]
#2670108
06/26/19 08:49 AM
06/26/19 08:49 AM
|
Joined: Jan 2003
Posts: 18,070
S.E. Michigan
ZIPPY
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2003
Posts: 18,070
S.E. Michigan
|
That heat sink is a nice addition, thank you!
I'm thinking a couple stand offs for mounting would help the heat situation even more.
Last edited by ZIPPY; 06/26/19 09:38 AM.
Rich H.
Esse Quam Videri
|
|
|
Re: Anyone run Ford TFI coil+HEI module with mopar distributor?
[Re: ZIPPY]
#2670153
06/26/19 10:53 AM
06/26/19 10:53 AM
|
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
would it be better to have it mounted flush with some heat sink paste to wick away heat produced in the module (like it is in the HEI dist) or to space it up to isolate it from heat in this metal mounting bracket itself?
live every 24 hour block of time like it's your last day on earth
|
|
|
|
|
|
|
] i would use the paste on the bracket, then space it away from the surface 1/4-3/8" with a couple of bushings from the hardware store.