Re: trying to remove stick on wheel weight adhesive.
[Re: galen]
#991435
05/13/11 02:12 AM
05/13/11 02:12 AM
|
Joined: Jan 2004
Posts: 27,347 Today? Who Knows?
1_WILD_RT
Management Trainee
|
Management Trainee
Joined: Jan 2004
Posts: 27,347
Today? Who Knows?
|
Rag soaked with Goof-Off.. Let it lay on the goo for a minute then rub with your finger nail....
"The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."
|
|
|
Re: trying to remove stick on wheel weight adhesive.
[Re: Pyper70]
#991437
05/13/11 06:35 AM
05/13/11 06:35 AM
|
Joined: Jan 2003
Posts: 2,364 PA
70HemiGTX
top fuel
|
top fuel
Joined: Jan 2003
Posts: 2,364
PA
|
|
|
|
Re: trying to remove stick on wheel weight adhesive.
[Re: Challenger 1]
#991439
05/13/11 10:01 AM
05/13/11 10:01 AM
|
Joined: Jan 2006
Posts: 587 IL . usa
cjs69mope
mopar
|
mopar
Joined: Jan 2006
Posts: 587
IL . usa
|
becarfull but the best is gas on a rag .
1969 Dodge Charger
1969 Dodge Superbee
|
|
|
Re: trying to remove stick on wheel weight adhesive.
[Re: cjs69mope]
#991440
05/13/11 11:34 AM
05/13/11 11:34 AM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
|
|
|
Re: trying to remove stick on wheel weight adhesive.
[Re: dartman366]
#991446
05/14/11 12:15 AM
05/14/11 12:15 AM
|
Joined: Feb 2005
Posts: 672 Wichita, KS
tmef
mopar
|
mopar
Joined: Feb 2005
Posts: 672
Wichita, KS
|
Quote:
3M general purpose adhesive remover.
The stuff is great.
|
|
|
Re: trying to remove stick on wheel weight adhesive.
[Re: tmef]
#991447
05/14/11 12:04 PM
05/14/11 12:04 PM
|
Joined: Feb 2005
Posts: 28,312 Cincinnati, Ohio
Challenger 1
Too Many Posts
|
Too Many Posts
Joined: Feb 2005
Posts: 28,312
Cincinnati, Ohio
|
Quote:
Quote:
3M general purpose adhesive remover.
The stuff is great.
Sorry I have to disaggree with you. 2 nights ago I removed this sound insulation from a truck. There was a lot of foam and adhesive stuck to the firewall. I started with 3M, have used it many times before on smaller projects and I think is just OK. I guess it's safe on painted surfaces but it don't work near as well as lacquer thinner. I sprayed the 3m stuff about 6 times trying to get it to soften the adhesive but was slow to react. I finally broke out the lacquer thinner and soaked my rag with it and it did a much better job. It was way faster and didn't harm the paint on the firewall. It made it clean so my new insulation would stick better.
So good ole lacquer thinner comes through again, alway good to keep some on hand. My
|
|
|
Re: trying to remove stick on wheel weight adhesive.
[Re: jcastle1]
#991448
05/14/11 12:18 PM
05/14/11 12:18 PM
|
Joined: Nov 2007
Posts: 21,847 Kirkland, Washington
Pacnorthcuda
Too Many Posts
|
Too Many Posts
Joined: Nov 2007
Posts: 21,847
Kirkland, Washington
|
Quote:
DO NOT USE LACQUER THINNER !!!!!! it will damage your tires.
How can lacquer thinner damage tires when it never touches them?
On a polished wheel Lacquer thinner is the way to go. Now if the wheel is clear coated/painted THEN be careful with solvents!
|
|
|
Re: trying to remove stick on wheel weight adhesive.
[Re: Challenger 1]
#991449
05/14/11 01:12 PM
05/14/11 01:12 PM
|
Joined: Feb 2005
Posts: 672 Wichita, KS
tmef
mopar
|
mopar
Joined: Feb 2005
Posts: 672
Wichita, KS
|
Quote:
Quote:
Quote:
3M general purpose adhesive remover.
The stuff is great.
Sorry I have to disaggree with you. 2 nights ago I removed this sound insulation from a truck. There was a lot of foam and adhesive stuck to the firewall. I started with 3M, have used it many times before on smaller projects and I think is just OK. I guess it's safe on painted surfaces but it don't work near as well as lacquer thinner. I sprayed the 3m stuff about 6 times trying to get it to soften the adhesive but was slow to react. I finally broke out the lacquer thinner and soaked my rag with it and it did a much better job. It was way faster and didn't harm the paint on the firewall. It made it clean so my new insulation would stick better.
So good ole lacquer thinner comes through again, alway good to keep some on hand. My
The 3M adhesive remover I have is in a 1 pint metal container, kinda like what you would buy acetone in at the hardware store. This spray stuff I have never used.
|
|
|
|
|