727 small block trans shield recommendations? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 727 small block trans shield recommendations?

Print Thread

727 small block trans shield recommendations? #978048 04/22/11 01:32 PM 04/22/11 01:32 PM
Joined: Jun 2006 Posts: 834 Beavercreek, Ohio OA5599 OP super stock
OA5599 OP super stock Joined: Jun 2006 Posts: 834 Beavercreek, Ohio	After reading a post from a few days ago, I'm spooked about putting our new 550 hp stroker in without a transmissin shield. Can anyone recommend one for a '69 Cuda that will fit well and protect my limbs? Thanks

Re: 727 small block trans shield recommendations? [Re: OA5599] #978049 04/22/11 03:49 PM 04/22/11 03:49 PM
Joined: Sep 2003 Posts: 6,847 Missouri StrokerPost master
StrokerPost master Joined: Sep 2003 Posts: 6,847 Missouri	CSR are probably gonna be the better fitting, at least of the ones I know of. This pic is a BB version, but its the same deal. You may have to do a teeny bit of trimming to make it fit, but very little. My . http://www.jegs.com/webapp/wcs/stores/se...amp;showValue=1

Re: 727 small block trans shield recommendations? [Re: StrokerPost] #978050 04/22/11 05:02 PM 04/22/11 05:02 PM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel master
rebel master Joined: Dec 2006 Posts: 4,647 aotearoa	a little bit of work to fold the firewall pinchweld lip & maybe a slight bit of trans tunnel hammering where it reduces down in size but without doubt, the CSR is the best fit.

Re: 727 small block trans shield recommendations? [Re: rebel] #978051 04/22/11 11:16 PM 04/22/11 11:16 PM
Joined: Mar 2006 Posts: 9,827 MI, usa dvw master
dvw master Joined: Mar 2006 Posts: 9,827 MI, usa	Another issue to watch for is header clearance. Mine don't leave enough room between to my 727 and the collector. Doug

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1