727 small block trans shield recommendations?

After reading a post from a few days ago, I'm spooked about putting our new 550 hp stroker in without a transmissin shield. Can anyone recommend one for a '69 Cuda that will fit well and protect my limbs?

Thanks

CSR are probably gonna be the better fitting, at least of the ones I know of. This pic is a BB version, but its the same deal. You may have to do a teeny bit of trimming to make it fit, but very little. My .
http://www.jegs.com/webapp/wcs/stores/se...amp;showValue=1

a little bit of work to fold the firewall pinchweld lip & maybe a slight bit of trans tunnel hammering where it reduces down in size but without doubt, the CSR is the best fit.

Another issue to watch for is header clearance. Mine don't leave enough room between to my 727 and the collector.
Doug