Re: PSO Heads
[Re: 340man4ever]
#864218
11/28/10 01:42 AM
11/28/10 01:42 AM
|
Joined: Jun 2003
Posts: 9,225 Charleston
sixpackgut
Drag Week Mod Champion
|
Drag Week Mod Champion
Joined: Jun 2003
Posts: 9,225
Charleston
|
hey Brandon, could you please buy some PSO heads from MM. we would all like a set. but make them look like stock heads
Thank You Ray
Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram
performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs
|
|
|
Re: PSO Heads
[Re: B1Johnny]
#864225
11/28/10 04:11 PM
11/28/10 04:11 PM
|
Joined: Mar 2006
Posts: 9,910 Eighty Four, PA
B G Racing
master
|
master
Joined: Mar 2006
Posts: 9,910
Eighty Four, PA
|
Quote:
i started researching pso heads in sept of 2009,after owning a homemade set made by stan moore back in 1996.i talked to scott at norwalk in sept 2009,he did not have any for sale.he talked about moved centerline heads.i talked to mike at muscle motors he likes predators . on his website he says over 1100 hp they have head gasket problems.my friend stan had over 1300 in a 400 block filled to the top with hard block no problems with head gaskets.i met pete at norwalk in 2009 he had 5 sets of pso heads completely done.i asked him to hold a set for me which they did. i talked to dave rotter at brodix,who did alot of work on those heads for wayne county.he said the only way he would sell them is a special order you have to buy 5 sets,all you get is a casting.pete and chuck invested time money r&d to bring the best inline b1 head back from the dead.i thank them for that.in my mind they are the only ones doing it.i have been running b1 heads since 1993 on stock blocks when nothing was available. i am happy that companies like indy ,koleno,world,have given us blocks and best machine has given the best b1 head.it doesnt matter that brodix made the heads they are not doing anything with them .best did not copy koffel they did their own research.they do not have big egos they just want the best product for us mopar guys.best machine rocks later johnny
Well put.before we took on the Indy line we set up a lot of SB Mopars with Brodex heads.These we all done by my son Curt.Everyone said we were running Koffel's B-1.
|
|
|
Re: PSO Heads
[Re: B G Racing]
#864226
11/28/10 04:45 PM
11/28/10 04:45 PM
|
Joined: Oct 2004
Posts: 1,752 detroit area
moderncylinder
top fuel
|
top fuel
Joined: Oct 2004
Posts: 1,752
detroit area
|
so what youre saying is that best machine are the only guys that should be selling this head?
there is major chest pounding and egos here the way i see it,, in the other post about b1 heads with al aguire,, pete was way over the top in my opinion
if a guy who was an engine builder bought a set from best because they were "available" at the time,, and that motor worked out good in his opinion then he had 3 guys who wanted the same thing,, he cannot try to improve on what he saw in their head and try to do his own version? i dont understand how that is wrong..
in mike's version,, i believe it will use the same valve position as the b1-mc so you could just bolt these on as an upgrade,, which i believe best's does too,, all that original r and d done by koffel... mikes head will also use the std spark plug hole position,, as r and d done by koffel again,, i believe the same as best's head..
best did do r and d to get rockers in a current set up,,, which i could throw the head in a box and jesel will do it for me if i wanted,,, or i could make stands based on what i want for segment length and so on,, ive done it many times before,, so its nothing new to me,, plus looking at the head from best i wouldnt do it that way anyways,, but its my opinion,,, nothing really wrong with what they did probably
|
|
|
Re: PSO Heads
[Re: PETE@BESTMACHINE]
#864228
11/28/10 06:34 PM
11/28/10 06:34 PM
|
Joined: Nov 2010
Posts: 1 usa
Elwood
member
|
member
Joined: Nov 2010
Posts: 1
usa
|
Quote:
Monte the head comes with no seats,guides,guide hole location, and a useable port. There are no rocker stand holes also. So what did I copy from Koffel? They did not develop the head in a useable state, ours are runable right out of the box. No other B-1 Head is runable out of the box. Anybody can buy the raw casting and take it from there, or copy someone elses money investment, time and hard work. We sent the head to piston companys to scan and rocker companys for rockers also. So Monte you are incorrect in your statement and I guess there are all kinds of low lifes in the world. And for everbodys information we will continue to offer the PSO Head that we developed and I use on my race car.
You guys didn't develop it, you had other people improve on it and then called it yours. I'd say, along with slicing bread and claiming any and all B-1 head use, you guys have are gonna have a hard time topping yourselves. What's next? Walking on water? Curing Cancer?
Just my
Elwood
|
|
|
Re: PSO Heads
[Re: 90ram]
#864229
11/28/10 08:52 PM
11/28/10 08:52 PM
|
Joined: Nov 2010
Posts: 37 usa
90ram
OP
member
|
OP
member
Joined: Nov 2010
Posts: 37
usa
|
Quote:
Does anybody know who sells them? [/quote Wow I didn't know this would I just want to buy a set, We are Mopar People and We have to Spend twice as much and work twice as hard than the other brands! We need to be like a Army and work together. The Fight should be on the Track against brand X. You can't Win a War if the Soldiers don't sick together. I want to thank,Andy F, B-1Fish 540, Modern Cylinder and Pete Bestmachine for Understanding the question
|
|
|
Re: PSO Heads
[Re: 340man4ever]
#864230
11/29/10 01:26 AM
11/29/10 01:26 AM
|
Joined: Sep 2009
Posts: 1,805 ky hills
thehemikid
top fuel
|
top fuel
Joined: Sep 2009
Posts: 1,805
ky hills
|
...Fwiw, ...little piece of info, its barely related. I 1989/90 I went to visit an old Tool & Die maker in Fairfield Il, Ed Ritcherson, (last name may be off, its been awhile) about going into Tool Grinding, noticed a red hat hanging on the wall with Wayne County's car on it. He explained how Wayne County brought him a ported head for him to make a cutter that would do the bowl, then he gave me the hat.
Last edited by thehemikid; 11/29/10 01:28 AM.
|
|
|
Re: PSO Heads
[Re: thehemikid]
#864231
11/29/10 10:35 AM
11/29/10 10:35 AM
|
Joined: Jan 2003
Posts: 10,016 Frostbitefalls MN (Rocky&Bullw...
gregsdart
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,016
Frostbitefalls MN (Rocky&Bullw...
|
Posts like this really bother me when people start flinging mud. Reputations of businesses are at stake, and personal reputations as well. I have no interest in who comes out looking the best, just upset when I read some of the crap posted here. If you feel offended by that last statement, better do a little self assessment. Most of the offenders don't even realize the damage they do. How many guys make a poor decision based on some crap that got posted? Unfortunately too many.
8..603 156 mph best, 2905 lbs 549, indy 572-13, alky
|
|
|
Re: PSO Heads
[Re: fishy340]
#864234
11/29/10 12:02 PM
11/29/10 12:02 PM
|
Joined: Mar 2005
Posts: 2,172 Ohio
theclutcher
top fuel
|
top fuel
Joined: Mar 2005
Posts: 2,172
Ohio
|
Quote:
i'f this was oprah i'd give all u guys a set of pso heads.
can I just have digitizer and 5 axis cnc time?
|
|
|
Re: PSO Heads
[Re: theclutcher]
#864235
11/29/10 12:24 PM
11/29/10 12:24 PM
|
Joined: Mar 2008
Posts: 659 Tampa Fl
kens avenger
mopar addict
|
mopar addict
Joined: Mar 2008
Posts: 659
Tampa Fl
|
90Ram.....it might be a good thing there isn't any of the PSO heads around.....Think If you kill one head(stuff happens)where would you get another one??????think how much money you will have in the valve train...think about that sheet metal intake.. the headers...the valve cover rail spacer.. I could go on and on and on.. you kill a B1Mc head you can get another one...NO ONE HAS said when they are gonna order a run of the raw castings!!!! It takes a good bit of money and time.. Best layed out some for the OLD CASTINGS They bought form Koffels........this was in 05/06.. .......FOR THE GAINS ITS NOT WORTH IT..... 90Ram PM me with a Phone Number.. If you want more .. PS.when the B1MC head came out it was worse then this.. RIGHT SCOTT HAVE A NICE DAY
Remember in here some don't think you should have a Opinion.. sad fact..
|
|
|
Re: PSO Heads
[Re: PETE@BESTMACHINE]
#864236
11/29/10 01:05 PM
11/29/10 01:05 PM
|
Joined: Nov 2004
Posts: 6,890 North Alabama
Monte_Smith
master
|
master
Joined: Nov 2004
Posts: 6,890
North Alabama
|
Quote:
Wrong again Monte, the PSO head is a raw casting not developed, thats up to the user. And yes we we the frist to offer the casting finish and runable out of the box. Maybe you should get your facts straight before you post wrong info. Yes someone did buy are heads and took them to shop to have them checked out, wonder why? but that realy is a compliment to us, so thanks.
How am I wrong. I SAID the PSO and TS was NOT useable from Brodix. As for you guys having the first useable one.....not hardly. I saw some PSO heads on a running motor at Koffels, over 10 years ago.
Monte
|
|
|
Re: PSO Heads
[Re: 340man4ever]
#864237
11/29/10 01:39 PM
11/29/10 01:39 PM
|
Joined: Feb 2005
Posts: 232 Lansing, MI
MuscleMike
enthusiast
|
enthusiast
Joined: Feb 2005
Posts: 232
Lansing, MI
|
I guess I'll jump in and claify a few things. I have worked with Jeff on 2 different versions of a PSO head. One has Stock valve spacing and sizes (2.300/1.78) and stock valve angle(15 degrees). A drop on replacement if you will. The second is a MC version with 2.400,1.810 valve sizing and valve angle (15 degrees). Most of the time I use Jesel rockers when I build B1 headed engines. The first few sets of PSO heads I did were completed in 2009. The story of the dragster that ran @ Monster Mopar on my web site competed in 2009. Did I buy a set of machined heads from Best? Yup! I did earlier this year (2010) but it was NOT with the intention of "cloning" the head. I had a customer who was in a big rush and I could not get the raw castings, machine them and have the engine done in time for the customer. Chuck and Pete were selling machined heads very reasonable so to save time and get the customer out and going I used "their" design head. 2.400, 1.810 but I beleive it had a 13 or 14 degree valve angle. So I used their valve lenght, fly cut the pistons, used the rockers that T&D set up and that was that. The Best version has a larger runner volume than what I do and a different valve angle. Pete has been working on his PSO project for some time and his car flys. I commend him for his hard work and I would not "steal" his efforts. Are their similarities, some. A 2.400 is the biggest pratical valve that fits in a wedge head on a 4.500 bore. This is not specific to Best of MM. If my version had the same runner volume and valve location/angle call me a theif. But they don't, so save the mud slinging! My theory was to make a version of a PSO head that was more of a true drop on replacement (IE no piston modification necessary)of exisiting B1 headed combinations. The PSO can be a great upgrade for someone who doesn't want to make the leap to Predators. To qoute Rodney King: "Can't we all just get along?" I thought the GM and Ford guys were the enemies? Mike @MM
|
|
|
|
|