Re: B body torque boxes
[Re: rtpete]
#831302
10/16/10 08:13 PM
10/16/10 08:13 PM
|
Joined: Dec 2007
Posts: 18,165 Mass
DAYCLONA
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 18,165
Mass
|
Go right to the source AMD, they have a vast array of floor gussets/brackets, frame members, brackets, torque brackets, etc, inside, outside and under the car,...also some members here are dist. for the AMD line,...I'm sure they'll chime in
|
|
|
Re: B body torque boxes
[Re: badblack68]
#831304
10/16/10 09:16 PM
10/16/10 09:16 PM
|
Joined: Jan 2008
Posts: 2,592 None
71rm23
master
|
master
Joined: Jan 2008
Posts: 2,592
None
|
Speaking of torque boxes. Are they welded to the front, just inside of the frame rails? Or at all four corners, inside the frame rails? Also, I looked at AMD site and didnt see them. Its for a 71 Roadrunner.
Last edited by 71rm23; 10/16/10 09:37 PM.
|
|
|
Re: B body torque boxes
[Re: 71rm23]
#831306
10/17/10 04:10 AM
10/17/10 04:10 AM
|
Joined: Sep 2003
Posts: 1,168 Vancouver, WA
MoparMarq
super stock
|
super stock
Joined: Sep 2003
Posts: 1,168
Vancouver, WA
|
Quote:
Speaking of torque boxes. Are they welded to the front, just inside of the frame rails? Or at all four corners, inside the frame rails? Also, I looked at AMD site and didnt see them. Its for a 71 Roadrunner.
No, outside frame rails, but inside rocker panel seams. This pic is of the left rear torque box on my '72 RR. It is looking rearward on the driver's side of the car along the seam of the rocker panel and floor panel. The holes at the top are to make it easier to get to the top two nuts on the leaf spring hanger.
|
|
|
Re: B body torque boxes
[Re: MoparMarq]
#831307
10/17/10 10:17 AM
10/17/10 10:17 AM
|
Joined: Jan 2008
Posts: 2,592 None
71rm23
master
|
master
Joined: Jan 2008
Posts: 2,592
None
|
Quote:
Quote:
Speaking of torque boxes. Are they welded to the front, just inside of the frame rails? Or at all four corners, inside the frame rails? Also, I looked at AMD site and didnt see them. Its for a 71 Roadrunner.
No, outside frame rails, but inside rocker panel seams. This pic is of the left rear torque box on my '72 RR. It is looking rearward on the driver's side of the car along the seam of the rocker panel and floor panel. The holes at the top are to make it easier to get to the top two nuts on the leaf spring hanger.
Thanks Moparmarq!
|
|
|
|
|