Hemi oil system question - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Hemi oil system question

Print Thread

Hemi oil system question #734843 06/27/10 04:08 PM 06/27/10 04:08 PM
Joined: May 2005 Posts: 6,446 NJ-USA H HPMike OP master
HPMike OP master H Joined: May 2005 Posts: 6,446 NJ-USA	Anyone know if this setup would clear an unmodified hemi K frame and stock mounts? Can't see how it wouldn't, but just checking to see if anyone is running this setup. Can't really tell from the photos how thick the sandwich plate is? http://chucker54.stores.yahoo.net/siliexoilkit1.html MB

Re: Hemi oil system question [Re: HPMike] #734844 06/27/10 04:49 PM 06/27/10 04:49 PM
Joined: Nov 2003 Posts: 6,293 Rock Springs Bob_Coomer master
Bob_Coomer master Joined: Nov 2003 Posts: 6,293 Rock Springs	If the pickup line comes out the front and the line comes underneath and loops up to the fitting.... No... The Indy pump cover or even the Muscle Motors pump cover would be much better and comes out the back IMO I would buy the Indy pump cover, or the Muscle Motors pump cover, and the static pickup setup 440Source offers if you want to save a few bucks. [color:"red"]65 Hemi Belvedere coming soon [/color] [color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]

Re: Hemi oil system question [Re: Bob_Coomer] #734845 06/27/10 05:32 PM 06/27/10 05:32 PM
Joined: May 2005 Posts: 6,446 NJ-USA H HPMike OP master
HPMike OP master H Joined: May 2005 Posts: 6,446 NJ-USA	Quote: If the pickup line comes out the front and the line comes underneath and loops up to the fitting.... No... The Indy pump cover or even the Muscle Motors pump cover would be much better and comes out the back IMO I would buy the Indy pump cover, or the Muscle Motors pump cover, and the static pickup setup 440Source offers if you want to save a few bucks. I see/work on a lot of original hemi cars and can tell you that the MM or Indy pump covers look too bulky to work-but in all honesty I have never actually tried it. The stock mount looks too close with the mass of those covers. 440 Source??, uhmm , no thanks.... Anyone with any real world installation issues to report? MB

Re: Hemi oil system question [Re: Bob_Coomer] #734846 06/27/10 05:37 PM 06/27/10 05:37 PM
Joined: Jun 2005 Posts: 6,257 gulfport, ms, west mi rowin4 master
rowin4 master Joined: Jun 2005 Posts: 6,257 gulfport, ms, west mi	I don't know that the rear exit plate wold be better. With the milodon rear exit with a motor plate I had to modify the steering box bracket and then still had to find a special fitting to clear. But looking at it again that pick up plate is between the pump and the motor, my external pick up plate was bolted to the end of the pump . As I don't have any original mounts at all , I can't say I guess one way or the other. You'll also need to get a longer intermediate oil pump shaft along with that type of kit. Last edited by rowin4; 06/27/10 05:39 PM. it's ok to butt heads, just don't do it with a butthead

Re: Hemi oil system question [Re: HPMike] #734847 06/27/10 05:55 PM 06/27/10 05:55 PM
Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky. Hemi Allstate master
Hemi Allstate master Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky.	This might help. https://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=4759108&an=0&page=11 Last edited by Hemi Allstate; 06/27/10 05:58 PM. 1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019

Re: Hemi oil system question [Re: HPMike] #734848 06/27/10 06:48 PM 06/27/10 06:48 PM
Joined: Aug 2003 Posts: 43,219 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,219 Bend,OR USA	That plate was designed to go along with the second inlet on the pump cover, the plate necks down internally to a very small area, not good on the inlet side I know guys running that system on the street and at the track, I would not trust it or use it by itself BTW, I do use it on my dual line setup on my 527 bracket motor Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: Hemi oil system question [Re: Cab_Burge] #734849 06/27/10 07:00 PM 06/27/10 07:00 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	The front inlet sandwich plate will work with the stock mounts and is as good if not better than the stock internal pickup.The rear inlets require modifying the mount,the side will work if you also loop it to the front.Remember to use the longer intermediate shaft with the sandwich plate.You can also just buy the Milodon alum pump with the front inlet and use a stock or plugged aftermarket cover plate Last edited by B G Racing; 06/27/10 07:02 PM. [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Hemi oil system question [Re: B G Racing] #734850 06/28/10 11:28 AM 06/28/10 11:28 AM
Joined: May 2009 Posts: 511 Temperance, MI 6 68 HEMI GTS mopar
68 HEMI GTS mopar 6 Joined: May 2009 Posts: 511 Temperance, MI	i run the milodon pump with a stock cover, no internal pickup. works great and will clear stock mounts. 68 Dart GTS "HEMI" 10.30 @ 131 pump gas street car 3780# 69 Roadrunner 511 six pack 10.92 drive to track street car

Re: Hemi oil system question [Re: 68 HEMI GTS] #734851 06/28/10 12:49 PM 06/28/10 12:49 PM
Joined: Jan 2003 Posts: 75,043 U.S.S.A. JohnRR I Win
JohnRR I Win Joined: Jan 2003 Posts: 75,043 U.S.S.A.	Quote: i run the milodon pump with a stock cover, no internal pickup. works great and will clear stock mounts. Sorry to stray off topic but is that a hemi block with wedge ears on a stock BB a body K ???

Re: Hemi oil system question [Re: JohnRR] #734852 06/28/10 05:38 PM 06/28/10 05:38 PM
Joined: May 2009 Posts: 511 Temperance, MI 6 68 HEMI GTS mopar
68 HEMI GTS mopar 6 Joined: May 2009 Posts: 511 Temperance, MI	Quote: Quote: Sorry to stray off topic but is that a hemi block with wedge ears on a stock BB a body K ??? yep , sure is. lol 68 Dart GTS "HEMI" 10.30 @ 131 pump gas street car 3780# 69 Roadrunner 511 six pack 10.92 drive to track street car

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1