holley intake vs. air grabber
#627549
03/01/10 12:34 AM
03/01/10 12:34 AM
|
Joined: Feb 2009
Posts: 54 ca,us
1hirschdalemopar
OP
member
|
OP
member
Joined: Feb 2009
Posts: 54
ca,us
|
Need some thoughts.69 superbee air grabber set up,505 stroker motor,hughes hyd.roller cam 252/258,576 lift,eddie rpm heads light port work,holley 850 quick fuel carb.street car 95% of the time.I really want to run a eddie rpm but I want to keep the stock look and the air set up and I dont think I can do this with the rpm intake.What do you guys think can it happen?As another plan,maybe the holley street dominator low rise intake single plane,do you think it will work well with my set up or not?The holley shows better #s than the ch4b eddie and the wieand action plus.I just need some ideas,I really like the eddie rpm but the holley has good flow #s and its lower rise.I just dont want to cork the motor off to bad with the intake.
superbee
|
|
|
Re: holley intake vs. air grabber
[Re: 1hirschdalemopar]
#627550
03/01/10 12:46 AM
03/01/10 12:46 AM
|
Joined: Jan 2004
Posts: 5,476
340dart4spd
Parts Problem
|
Parts Problem
Joined: Jan 2004
Posts: 5,476
|
Quote:
Need some thoughts.69 superbee air grabber set up,505 stroker motor,hughes hyd.roller cam 252/258,576 lift,eddie rpm heads light port work,holley 850 quick fuel carb.street car 95% of the time.I really want to run a eddie rpm but I want to keep the stock look and the air set up and I dont think I can do this with the rpm intake.What do you guys think can it happen?As another plan,maybe the holley street dominator low rise intake single plane,do you think it will work well with my set up or not?The holley shows better #s than the ch4b eddie and the wieand action plus.I just need some ideas,I really like the eddie rpm but the holley has good flow #s and its lower rise.I just dont want to cork the motor off to bad with the intake.
Seems like someone had this same Issue a few weeks back? hmmmmmmm..
|
|
|
Re: holley intake vs. air grabber
[Re: 340dart4spd ]
#627552
03/01/10 01:21 AM
03/01/10 01:21 AM
|
Joined: Feb 2009
Posts: 54 ca,us
1hirschdalemopar
OP
member
|
OP
member
Joined: Feb 2009
Posts: 54
ca,us
|
Quote:
Quote:
Need some thoughts.69 superbee air grabber set up,505 stroker motor,hughes hyd.roller cam 252/258,576 lift,eddie rpm heads light port work,holley 850 quick fuel carb.street car 95% of the time.I really want to run a eddie rpm but I want to keep the stock look and the air set up and I dont think I can do this with the rpm intake.What do you guys think can it happen?As another plan,maybe the holley street dominator low rise intake single plane,do you think it will work well with my set up or not?The holley shows better #s than the ch4b eddie and the wieand action plus.I just need some ideas,I really like the eddie rpm but the holley has good flow #s and its lower rise.I just dont want to cork the motor off to bad with the intake.
Seems like someone had this same Issue a few weeks back? hmmmmmmm..
Yeah,I posted something a while back on this subject,I was just looking for more info,maybe someone has done this set up before or knows more about these intakes than what I have been reading about them.I am a newbie to mopar.My brother and I decided after our dad passed away that we would sell our chevies and fix up the mopars in the barn of my dads(69 superbee and 69 cornet r/t 4sp dana car)so here we are trying to figure it out,its a whole new world of mopar for us,but its way fun.Thanks for the reply
superbee
|
|
|
Re: holley intake vs. air grabber
[Re: 1hirschdalemopar]
#627554
03/01/10 01:33 AM
03/01/10 01:33 AM
|
Joined: Feb 2003
Posts: 21,318 Manitoba, Canada
DaytonaTurbo
Too Many Posts
|
Too Many Posts
Joined: Feb 2003
Posts: 21,318
Manitoba, Canada
|
Quote:
Quote:
CH4B is a good intake for stock heads, but with aftermarket heads it's going to become the bottleneck. I think you can buy a drop base for your air grabber from:
http://www.hybrid-fiberglass-solutions.com/
Thanks daytonaturbo I will look right now.Any idea on the intake that will be the bomb on this set up?
You're probably going to end up with a holley street dominator with an aftermarket drop-base for your air grabber. I don't think you can get it to work with a RPM just from a height standpoint.
|
|
|
Re: holley intake vs. air grabber
[Re: DaytonaTurbo]
#627557
03/01/10 05:20 PM
03/01/10 05:20 PM
|
Joined: Mar 2005
Posts: 322 Itasca, Texas
Mad_Scientist
enthusiast
|
enthusiast
Joined: Mar 2005
Posts: 322
Itasca, Texas
|
I run the Performer RPM with a fiberglass base from the website mentioned above on my 69 Bee. It fits under the Ramcharger Hood, but just bareley. This is on a 440.
69 Super Bee 440 5-speed 70 Dart Swinger 340 4-speed 69 Camaro SS 396 4-speed 66 Cutlass Convertilbe 70 Judge Ram Air III 4-speed 68 F-100 SWB
|
|
|
|
|