|
|
Upper A-arm cam and bolts
#476425
09/22/09 08:50 AM
09/22/09 08:50 AM
|
Joined: Jan 2003
Posts: 1,075
rochester,new york
plumebody
OP
super stock
|
OP
super stock
Joined: Jan 2003
Posts: 1,075
rochester,new york
|
I found mine were put in backwards and when I tried to adjust the alinement the bolts were just spinning and were found to be stripped. I would like to replace the cam and bolts. I have looked around but can't seem to locate. Any ideas? I checked BE/A,Jim's, no luck. 
|
|
|
Re: Upper A-arm cam and bolts
[Re: mkdart]
#476427
09/22/09 09:04 AM
09/22/09 09:04 AM
|
Joined: Jan 2003
Posts: 21,065
Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,065
Niles , Ohio
|
NAPA has them also.I believe even Advanced can get them.Rocky
Chrysler Firepower
|
|
|
Re: Upper A-arm cam and bolts
[Re: plumebody]
#476432
09/22/09 11:18 PM
09/22/09 11:18 PM
|
Joined: Oct 2005
Posts: 797
arizona, usa
lokalik
super stock
|
super stock
Joined: Oct 2005
Posts: 797
arizona, usa
|
not to highjack the post but. when using the moog offset bushings their instructions say to install one way however, there was a post on moparts saying to install oppsite of the moog instructions. can anyone explain way you would not follow the manufacture instructions for this?
Last edited by lokalik; 09/22/09 11:24 PM.
|
|
|
Re: Upper A-arm cam and bolts
[Re: lokalik]
#476433
09/23/09 09:21 AM
09/23/09 09:21 AM
|
Joined: Jan 2003
Posts: 21,065
Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,065
Niles , Ohio
|
Follow the Moparts instructions.They are proper for Mopar.Moogs are for GM.Rocky
Chrysler Firepower
|
|
|
Re: Upper A-arm cam and bolts
[Re: lokalik]
#476434
09/23/09 03:14 PM
09/23/09 03:14 PM
|
Joined: Jan 2008
Posts: 553
DE
Ply72rr
mopar
|
mopar
Joined: Jan 2008
Posts: 553
DE
|
Quote:
not to highjack the post but. when using the moog offset bushings their instructions say to install one way however, there was a post on moparts saying to install oppsite of the moog instructions. can anyone explain way you would not follow the manufacture instructions for this?
Because moog designed the offset bushings to cure a camber problem but we use them to gain positive caster.Installing them so the front moves the control arm out and the rear moves the arm in will increase pos caster.
|
|
|
|
|
|
|
