starter not engaging flywheel. Mopar mini - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer starter not engaging flywheel. Mopar mini

Print Thread

starter not engaging flywheel. Mopar mini #466234 09/12/09 02:19 AM 09/12/09 02:19 AM
Joined: Mar 2009 Posts: 112 Auburn Hills, Michigan K kieron_kohlmann OP member
kieron_kohlmann OP member K Joined: Mar 2009 Posts: 112 Auburn Hills, Michigan	hi ive got a mopar mini starter mounted on a scattershield. the starter tooth barely hits the flywheel. any way i can fix this?

Re: starter not engaging flywheel. Mopar mini [Re: kieron_kohlmann] #466235 09/12/09 08:47 AM 09/12/09 08:47 AM
Joined: Jan 2003 Posts: 21,074 Niles , Ohio T therocks oh wait.but hey.lets see.oh yeah.
therocks oh wait.but hey.lets see.oh yeah. T Joined: Jan 2003 Posts: 21,074 Niles , Ohio	SB or BB?On BBs for sure you need a 143 flywheel or the kit to move the starter in toward the crank.I have the mini on my 440 with shield and 143 and its flawless.RockyRocky Chrysler Firepower

Re: starter not engaging flywheel. Mopar mini [Re: therocks] #466236 09/13/09 02:31 AM 09/13/09 02:31 AM
Joined: Mar 2009 Posts: 112 Auburn Hills, Michigan K kieron_kohlmann OP member
kieron_kohlmann OP member K Joined: Mar 2009 Posts: 112 Auburn Hills, Michigan	BB with a 10.5" flywheel. where can i get this kit from? it already has the holes drilled to move the starter in but thats not enough.

Re: starter not engaging flywheel. Mopar mini [Re: kieron_kohlmann] #466237 09/13/09 05:44 AM 09/13/09 05:44 AM
Joined: Jan 2007 Posts: 82 Spring Hill, Fl. T tecmopar member
tecmopar member T Joined: Jan 2007 Posts: 82 Spring Hill, Fl.	What you need is the starter nose cup that bolts inside the bellhousing. I have one if need it, check out Summitt's site or Jegs first then let me know, good luck.

Re: starter not engaging flywheel. Mopar mini [Re: tecmopar] #466238 09/13/09 05:09 PM 09/13/09 05:09 PM
Joined: Mar 2009 Posts: 112 Auburn Hills, Michigan K kieron_kohlmann OP member
kieron_kohlmann OP member K Joined: Mar 2009 Posts: 112 Auburn Hills, Michigan	can you explain to me what the starter nose cup does?

Re: starter not engaging flywheel. Mopar mini [Re: kieron_kohlmann] #466239 09/14/09 05:36 AM 09/14/09 05:36 AM
Joined: Jan 2007 Posts: 82 Spring Hill, Fl. T tecmopar member
tecmopar member T Joined: Jan 2007 Posts: 82 Spring Hill, Fl.	If you look at your starter you'll see that the front of it has as part of the casting, a stub that hold the gear shaft end. his stub goes into the cup and keeps the starter from moving around with just the 2 bolts in it. The stock bellhousings have this cast into it.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1