Lokar kickdown w/ Holley carb - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Lokar kickdown w/ Holley carb

Print Thread

Lokar kickdown w/ Holley carb #386167 07/25/09 06:42 PM 07/25/09 06:42 PM
Joined: Feb 2003 Posts: 125 D duals OP member
duals OP member D Joined: Feb 2003 Posts: 125	72 Demon 340 that now has a 400 big block, kickdown was not hooked up due to trying to use the small block kickdown ( not me previous owner ), I purchased the Lokar kickdown cable which looks great but I was told if useing a Holley carb I would need some kind od adapter at the carb and could be bought at any big auto supply. Any pics of this bracket or ? Thanks

Re: Lokar kickdown w/ Holley carb [Re: duals] #386168 07/25/09 07:53 PM 07/25/09 07:53 PM
Joined: Jan 2003 Posts: 25,858 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,858 Rio Linda, CA	The special Mopar throttle lever extension is only needed when using the factory linkage, the Lokar uses tyhe existing hole in the bottom of the Holley throttle lever. The INTERNET, the MISinformation superhighway

Re: Lokar kickdown w/ Holley carb [Re: John_Kunkel] #386169 07/25/09 08:09 PM 07/25/09 08:09 PM
Joined: Jan 2003 Posts: 9,826 las vegas 70AARcuda master
70AARcuda master Joined: Jan 2003 Posts: 9,826 las vegas	the lokar cable will not bolt on the stock mopar bracket.. you will need one of these... http://www.arengineering.com/throttlebracket/Tbracket/tbracketframe.html can be bought from mancini racing. Tony 70 AARCuda Vitamin C 71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield) 71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas) 71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)

Re: Lokar kickdown w/ Holley carb [Re: 70AARcuda] #386170 07/25/09 09:12 PM 07/25/09 09:12 PM
Joined: Apr 2007 Posts: 4,233 petaluma,ca. u.s.a. west master
west master Joined: Apr 2007 Posts: 4,233 petaluma,ca. u.s.a.	Quote: the lokar cable will not bolt on the stock mopar bracket.. you will need one of these... http://www.arengineering.com/throttlebracket/Tbracket/tbracketframe.html can be bought from mancini racing. you dont need that.it attaches at the carb

Re: Lokar kickdown w/ Holley carb [Re: west] #386171 07/26/09 12:19 AM 07/26/09 12:19 AM
Joined: Jan 2003 Posts: 9,826 las vegas 70AARcuda master
70AARcuda master Joined: Jan 2003 Posts: 9,826 las vegas	Quote: Quote: the lokar cable will not bolt on the stock mopar bracket.. you will need one of these... http://www.arengineering.com/throttlebracket/Tbracket/tbracketframe.html can be bought from mancini racing. you dont need that.it attaches at the carb i was not talking about the holley 20-7 bracket..i was talking about the stock mopar bracket that holds the throttle cable and kickdown linkage... Tony 70 AARCuda Vitamin C 71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield) 71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas) 71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)

Re: Lokar kickdown w/ Holley carb [Re: duals] #386172 07/26/09 12:48 AM 07/26/09 12:48 AM
Joined: Nov 2005 Posts: 1,751 jacksboro,tn 1bad318 1bad440
1bad318 1bad440 Joined: Nov 2005 Posts: 1,751 jacksboro,tn	the pic of the sb with the lokar set-up shows everything needed.you do away with the stock throttle cable and kick down bracket.the kick down cable bolts to the throttle cable bracket that the lokar system uses

Re: Lokar kickdown w/ Holley carb [Re: 70AARcuda] #386173 07/26/09 02:43 AM 07/26/09 02:43 AM
Joined: Apr 2007 Posts: 4,233 petaluma,ca. u.s.a. west master
west master Joined: Apr 2007 Posts: 4,233 petaluma,ca. u.s.a.	Quote: Quote: Quote: the lokar cable will not bolt on the stock mopar bracket.. you will need one of these... http://www.arengineering.com/throttlebracket/Tbracket/tbracketframe.html can be bought from mancini racing. you dont need that.it attaches at the carb i was not talking about the holley 20-7 bracket..i was talking about the stock mopar bracket that holds the throttle cable and kickdown linkage... so was I

Re: Lokar kickdown w/ Holley carb [Re: west] #386174 07/26/09 07:34 AM 07/26/09 07:34 AM
Joined: Mar 2007 Posts: 216 Tampa Florida M MoparTod enthusiast
MoparTod enthusiast M Joined: Mar 2007 Posts: 216 Tampa Florida	I have this system also mounted to my Holley and I have no issues. It worked great. Just make sure when you adjust your throttle pressure cable for the trans that you get it right. You can burn the transmission up quickly adjusted improperly.

Re: Lokar kickdown w/ Holley carb [Re: MoparTod] #386175 07/26/09 08:25 AM 07/26/09 08:25 AM
Joined: Feb 2003 Posts: 125 D duals OP member
duals OP member D Joined: Feb 2003 Posts: 125	Thanks everybody, pics were very helpful . Just need to get up off my butt and do it. lol

Re: Lokar kickdown w/ Holley carb [Re: west] #386176 07/26/09 08:30 AM 07/26/09 08:30 AM
Joined: Jun 2005 Posts: 1,534 Florida C CHRGR69 pro stock
CHRGR69 pro stock C Joined: Jun 2005 Posts: 1,534 Florida	Quote: Quote: the lokar cable will not bolt on the stock mopar bracket.. you will need one of these... http://www.arengineering.com/throttlebracket/Tbracket/tbracketframe.html can be bought from mancini racing. you dont need that.it attaches at the carb Get the bracket from Lokar Grandma always said I had "hands of gold"!

Re: Lokar kickdown w/ Holley carb [Re: duals] #386177 07/26/09 09:41 AM 07/26/09 09:41 AM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Why not just get a stock BB kick-down errr throttle pressure regulator linkage... anyway much easier to install. [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Re: Lokar kickdown w/ Holley carb [Re: Mr.Yuck] #386178 07/26/09 09:49 AM 07/26/09 09:49 AM
Joined: Jun 2005 Posts: 1,534 Florida C CHRGR69 pro stock
CHRGR69 pro stock C Joined: Jun 2005 Posts: 1,534 Florida	Quote: Why not just get a stock BB kick-down errr throttle pressure regulator linkage... anyway much easier to install. Because some of us snap off the pivot pin on the tranny. Grandma always said I had "hands of gold"!

Re: Lokar kickdown w/ Holley carb [Re: CHRGR69] #386179 07/26/09 09:59 AM 07/26/09 09:59 AM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Quote: Quote: Why not just get a stock BB kick-down errr throttle pressure regulator linkage... anyway much easier to install. Because some of us snap off the pivot pin on the tranny. hahaha I've done that before.... search this site for Lokar pictures. The instructions..well they aren't very good. [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Re: Lokar kickdown w/ Holley carb [Re: Mr.Yuck] #386180 07/26/09 11:02 AM 07/26/09 11:02 AM
Joined: Jan 2008 Posts: 508 Ontario, Canada 8 84Stepside mopar
84Stepside mopar 8 Joined: Jan 2008 Posts: 508 Ontario, Canada	i hear alot about people not setting throttle presure linkage correctly, i will be installing a lokar kit near the end of the summer, i was wonderings how you make sure the pressures are set correct? just with shift points?

Re: Lokar kickdown w/ Holley carb [Re: CHRGR69] #386181 07/26/09 04:35 PM 07/26/09 04:35 PM
Joined: Sep 2005 Posts: 6,516 Santa Cruz, California L Lefty master
Lefty master L Joined: Sep 2005 Posts: 6,516 Santa Cruz, California	Quote: Quote: Quote: the lokar cable will not bolt on the stock mopar bracket.. you will need one of these... http://www.arengineering.com/throttlebracket/Tbracket/tbracketframe.html can be bought from mancini racing. you dont need that.it attaches at the carb Get the bracket from Lokar and some more pics...

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1