Looking for interior door pull handle for 70-74 barracuda, passenger side with nice chrome. Please text 301-602-2465
Thanks for your consideration

Looking for chrome side view mirror, passenger side, 71-74 style with longer pedestal. Nice original or repro. Please Text 301-602-2465.

WTB: 70 Challenger drive shaft.... specifically a 7290 u-joint shaft that is 45.85"
PM with what you have.
TIA

I want to replace the seat foam (bottom) on the driver’s side bucket seat in my 71 Challenger. Legendary will not sell individual seat foam components. Looking for someone to split an order or for someone who has a leftover new seat bottom foam piece.

See second pic below for a list of applications for the foam I need.

Thanks for the ad

Wanted

Looking for nice driver quality white interior parts for a 71 cuda. Ebodyjoe@aol.com. 765-618-2037

Looking for the following parts that are clean and basically ready to go:

Door Latches 70-72

70 Cuda Standard Gage Bezel and Switch Bezel.

70 Cuda Door Glass both sides - Non Tinted within 5-6 hours driving distance from Central PA.

PM me here.

Thanks Moparts

I need a used black upper seat cover for the drivers seat on 72 cuda, I want a used one to match my original covers. I don't want a new one because it may look funny.

ISO pair of 1970 Challenger doors
Clean, rustfree, not banged up.

Looking for left and right brackets for 71 cuda grill Thanks. Allan email a.oger@hotmail.com

Hi,

Can anyone help with a hemi master 2229191? Please PM me if you can.

Thanks
Mike

EDIT FOUND Thanks for this ad but was found on Facebook marketplace

I need some help! My 71’ Motorola AM/FM is being restored by Brent Ball, Classic Radio Restoration in Ontario and I need some help for this particular gear inside of it. Here is what Brent e-mailed me today: Your main tuning mechanism gear has some missing teeth (unfortunately not super uncommon as this old plastic sometimes has weak areas and defects)

Anyway, I have tried to find parts from the few hundred radios I have here and I have got nothing.. I had a c body radio that I thought would do it, but as you can see in the picture the C body is close but different and I can't even remove parts from it to use as the bevel cut on the gear is different anyway.

Yours has the SHORT aluminum shaft and the C body I was hoping to use has a long alumimum shaft and the gear tooth cut is wrong. I have not parts and I can't find anything from any of my other radios. I have looked for three hours, taking covers off of various radios, hoping. To make the problem worse Chrysler used Motorola AND Philco radio mechanisms. Technically 70 used Philco and 71 used motorola. I have a 70 philco C body radio here for potentially using parts but its completely different and thus was disappointing.

So basically I need a gear from a 71 AM FM MOTOROLA E body radio. I can't find one, and I don't see any used radios on ebay.

wanted nos e body gas tank straps, believe 70-74 the same , also need nos J bolts...thx keith 318-393-1502

Hello everyone,

Looking for a RH radiator side bracket (or complete radiator if need be) for a 1970 challenger with a 26" radiator and a late '69 date code or early '70.

Car build date is 3/23.

PM here or call or text 815-790-1974

Thanks
Rich

Kicking around the idea of buying another Mopar. MUST be 4 speed!!! Looking for a really nice driver - no projects or trailer queens. I don't care about matching numbers.

67-68 Barracuda Fastback
1969-1970 Super Bee
1971-1972 Road Runner
1970 Challenger
1970-1974 Barracuda/Cuda

Budget up to 40K.

What do you have? PM me here.

Hi all:
Need a set of A/C vents for a 1970 Cuda. Center and right side.

Thanks