**************SOLD*************


I have for sale a Bob Book BRX-Jr twin blade carb. Will fit 4150 or 4500 intake. Was $2550 new from Book 10 years ago! I will also include a few pieces, the throttle cable bracket and a spacer for a 4500 intake if you want to use it. It was purchased to try and run NSS classes but out here in the west they don't care. So I no longer need it. It was on a 540" B1 and ran in the 8's with this carb and a pretty "mundane" bracket engine. It is a trick piece I just don't see myself using it anymore. Has very little use on it now, I kept it more for the novelty of running it. I would say it has under 40 passes in its life. Ill just run my 64 in brackets and S/C out here. My loss is someone's gain. PM me here, text or call me at 7 zero 7 9 8 zero 2 one 67 or email me at b1valiant@hotmail.com. Asking $1000 OBO....

727 Deep Pan and 5.0 band apply 50.00 pus shipping.
[img]http://i.imgur.com/f6HHgRy.jpg?1[/img]

Text: 254-2nine 1- two 628
or PM here.

Dave

I don't understand why image does not post.

Sold, thanks Moparts

I'm cleaning out what is left of my 727 parts. This is a late model big block case. The case is in great shape with good threads in all holes. Case is bare with the exception of a pump housing. Also included are the caster stands and casters as well as a Mopar rebuild kit, a filter extension kit for a deep pan and Mopar plug kit. Asking $150 for everything. Probably can't ship, this so local buyers who can pick up the parts would be preferred. PM me on the board, PayPal or cash preferred for payment.

For sale: Autometer Sport Comp II tachometer and gauges. Included are a 3690 tachometer with shift light and 3692 volt, 3637 water temp and 3627 oil pressure gauges. The gauges are all electrical gauges. I bought these for a car I used to own but sold the car before ever using them. I've been hanging on to them in case I bought another car but I don't think that's going to happen so I have decided to sell them. $450 for everything. Selling as a package only. No Paypal. gt340 at yahoo.com

https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3690
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3692
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3637
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3627

This is an 1150 gas Dominator built by IRD carburetors, I pulled the bowls off and checked everything for cleanliness, it’s clean and ready to use depending on your tuning requirements, the documentation for the carb is in the first pic, this is all I know about the carb, it had maybe 10 passes on it after it was bought and was replaced with a 1250 IRD carb, any questions just ask and I will answer to the best of my ability, this carb is part of an estate sale that I am in charge of, asking 525 shipped and it comes with a 4150 to 4500 adapter if you want it, payment needs to be cash or postal money order only, thanks, pm me here or email me at alilblacktruck@gmail.com

J&W Bell housing to adapt a big block Mopar to a Powerglide, it is brand new and still in the box, transmission builder and I got our wires crossed and both bought one, so this one was not used, included is a used 8 bolt crank adapter and adapter flywheel, both are used but in good condition, I also have a 6 bolt flywheel but no crank adapter to fit it, I can include whichever one you prefer. I’ll take 650.00 obo shipped in the CONUS for both, there not doing any good collecting dust on my parts shelf, pm me here or email me at alilblacktruck@gmail.com, I don’t do pay pal, payment will be cash or US postal money order, thanks, Rob

Fresh from CP Carrillo like brand new. 6.00", .927 pins and 2.100 crank journal. These rods retail $4000 and 6-8 month wait. Perfect for short deck (9.0-9.2"). Some of the best steel rods on the market came out of our back up engine with only a few dyno runs prior to being sent to CP. Asking $1100 for rods. Willing to ship worldwide.

Sold

Brand new billet water pump spacers for R3 blocks with or without Jesel front drive distributor.
These are 1.5" thick water pump spacers for a 9.0/9.2/9.6 deck small block mopar. Both sides have o-rings, so no silicone is necessary.
Asking $175 shipped to lower 48

Rear trailer tie down brackets for most A, B, or E body vehicles (doesn’t fit the 7 ¼ rear axle). These piggyback onto the bottom of the stock shock plate mounting nuts and then 4 more nuts hold these tie down brackets on. You must have enough extra thread hanging down on the bottom of your U-bolts to fit the ¼” thick tie down bracket and another nut. No disassembly necessary, just slide the brackets over the extra thread on your U-bolts, install the included nuts, tighten them down and you’re done. Takes about 10 minutes to install. These eliminate all the hassles that come with using axle straps. Fits A, B, and E body cars with the standard shock plates like shown in the pictures. $60.00 per pair plus shipping. I also have these available for cars with CalTracs, same price. Made in the USA.
Email mrrandyj@aol.com

Got this with some EFI stuff I bought but its WAY bigger than my application needs. Will work for EFI or carb applications - just swap the included spring.

BRAND NEW - only out of the box for photos.

Located in Ontarion, Canada but I can ship stateside from Carlisle, Pa. in two weeks.

Retails for $289. plus tax from Summit. Asking $250 plus the ride. Paypal F&F

Holley 750 HP Double Pumper

​Fresh rebuild works great

$350 plush the ride

paypal or usps money order

located 99323

A&A reverse manual valve body 22770-1LPR
Used a few seasons then went trans brake
$250 obo plus the ride these are $350 new
paypal or usps money order
located 99323

CARBURETOR Edelbrock Performer square bore, manual choke, black powder coated, 750 CFM, $250.00 plus postage. Contact DAN at 724 858 6662 or PM

Used Painless 8-Switch Panel. Part #50303. Fused w/lighted switches. Asking $100.00 plus shipping. Located in Ohio 43612. PM if interested.

SOLD

Used MSD 2-Step Part#8739. Works only with analog system. Asking $40.00 plus shipping. Located in Ohio 43612. PM if interested

Sold