For Sale - Race Parts - 2nd Quarter

**************SOLD*************


I have for sale a Bob Book BRX-Jr twin blade carb. Will fit 4150 or 4500 intake. Was $2550 new from Book 10 years ago! I will also include a few pieces, the throttle cable bracket and a spacer for a 4500 intake if you want to use it. It was purchased to try and run NSS classes but out here in the west they don't care. So I no longer need it. It was on a 540" B1 and ran in the 8's with this carb and a pretty "mundane" bracket engine. It is a trick piece I just don't see myself using it anymore. Has very little use on it now, I kept it more for the novelty of running it. I would say it has under 40 passes in its life. Ill just run my 64 in brackets and S/C out here. My loss is someone's gain. PM me here, text or call me at 7 zero 7 9 8 zero 2 one 67 or email me at b1valiant@hotmail.com. Asking $1000 OBO....

727 Deep Pan and 5.0 band apply 50.00 pus shipping.
[img]http://i.imgur.com/f6HHgRy.jpg?1[/img]

Text: 254-2nine 1- two 628
or PM here.

Dave

I don't understand why image does not post.

Sold, thanks Moparts

I'm cleaning out what is left of my 727 parts. This is a late model big block case. The case is in great shape with good threads in all holes. Case is bare with the exception of a pump housing. Also included are the caster stands and casters as well as a Mopar rebuild kit, a filter extension kit for a deep pan and Mopar plug kit. Asking $150 for everything. Probably can't ship, this so local buyers who can pick up the parts would be preferred. PM me on the board, PayPal or cash preferred for payment.

For sale: Autometer Sport Comp II tachometer and gauges. Included are a 3690 tachometer with shift light and 3692 volt, 3637 water temp and 3627 oil pressure gauges. The gauges are all electrical gauges. I bought these for a car I used to own but sold the car before ever using them. I've been hanging on to them in case I bought another car but I don't think that's going to happen so I have decided to sell them. $450 for everything. Selling as a package only. No Paypal. gt340 at yahoo.com

https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3690
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3692
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3637
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3627

This is an 1150 gas Dominator built by IRD carburetors, I pulled the bowls off and checked everything for cleanliness, it’s clean and ready to use depending on your tuning requirements, the documentation for the carb is in the first pic, this is all I know about the carb, it had maybe 10 passes on it after it was bought and was replaced with a 1250 IRD carb, any questions just ask and I will answer to the best of my ability, this carb is part of an estate sale that I am in charge of, asking 525 shipped and it comes with a 4150 to 4500 adapter if you want it, payment needs to be cash or postal money order only, thanks, pm me here or email me at alilblacktruck@gmail.com

J&W Bell housing to adapt a big block Mopar to a Powerglide, it is brand new and still in the box, transmission builder and I got our wires crossed and both bought one, so this one was not used, included is a used 8 bolt crank adapter and adapter flywheel, both are used but in good condition, I also have a 6 bolt flywheel but no crank adapter to fit it, I can include whichever one you prefer. I’ll take 650.00 obo shipped in the CONUS for both, there not doing any good collecting dust on my parts shelf, pm me here or email me at alilblacktruck@gmail.com, I don’t do pay pal, payment will be cash or US postal money order, thanks, Rob

Fresh from CP Carrillo like brand new. 6.00", .927 pins and 2.100 crank journal. These rods retail $4000 and 6-8 month wait. Perfect for short deck (9.0-9.2"). Some of the best steel rods on the market came out of our back up engine then freshened by CP. Asking $1000 for rods. Willing to ship worldwide.

Sold

sold

Rear trailer tie down brackets for most A, B, or E body vehicles (doesn’t fit the 7 ¼ rear axle). These piggyback onto the bottom of the stock shock plate mounting nuts and then 4 more nuts hold these tie down brackets on. You must have enough extra thread hanging down on the bottom of your U-bolts to fit the ¼” thick tie down bracket and another nut. No disassembly necessary, just slide the brackets over the extra thread on your U-bolts, install the included nuts, tighten them down and you’re done. Takes about 10 minutes to install. These eliminate all the hassles that come with using axle straps. Fits A, B, and E body cars with the standard shock plates like shown in the pictures. $60.00 per pair plus shipping. I also have these available for cars with CalTracs, same price. Made in the USA.
Email mrrandyj@aol.com

Got this with some EFI stuff I bought but its WAY bigger than my application needs. Will work for EFI or carb applications - just swap the included spring.

BRAND NEW - only out of the box for photos.

Located in Ontarion, Canada but I can ship stateside from Carlisle, Pa. in two weeks.

Retails for $289. plus tax from Summit. Asking $250 plus the ride. Paypal F&F

Holley 750 HP Double Pumper

​Fresh rebuild works great

$350 plush the ride

paypal or usps money order

located 99323

A&A reverse manual valve body 22770-1LPR
Used a few seasons then went trans brake
$250 obo plus the ride these are $350 new
paypal or usps money order
located 99323

CARBURETOR Edelbrock Performer square bore, manual choke, black powder coated, 750 CFM, $250.00 plus postage. Contact DAN at 724 858 6662 or PM

Used Painless 8-Switch Panel. Part #50303. Fused w/lighted switches. Asking $100.00 plus shipping. Located in Ohio 43612. PM if interested.

SOLD

Used MSD 2-Step Part#8739. Works only with analog system. Asking $40.00 plus shipping. Located in Ohio 43612. PM if interested

Sold

Sold

Right and left rear brake calipers 2015 > Hellcat low miles with hoses $200.00 + shipping
wedgedynamics@yahoo.com Marty

Hellcat 2015 ECU & Trinity tuner with disc & cable -Metco 2.75 pulley & 2 Gates green drive belts $200.00 for all free shipping.
wedgedynamics@yahoo.com Marty

Spare rockers - New Harland Sharp 1.60 rocker arms. I have a spare set of standard BB offset, and then one spare set with 0.650 offset. $100 for all four or I'll split them up. PM me on the board, PayPal preferred for payment.

I have a sets of new ductile iron main caps available for 360 main blocks. These are Mopar Performance R Block caps. . The sets include all 5 main caps. The center 3 caps are 4 bolt main. I have installed these caps on a stock block before by milling off the ends of the center caps to leave them 2 bolt. See pictures for the 3 modified center caps installed on a small block stroker engine. These caps are more stout than the stock caps and are an excellent upgrade for any high performance build. A line bore will be needed when installing new caps as well as some machining for the thrust bearing on the #3 cap and #5 cap for the oil seal.

Price is $320 shipped in the lower 48 states.

Email procketrichard@hotmail.com for more information.

I have a new set of Mopar W2 small block iron head castings. Valve angle is 18 degrees. No machining or port work looks to have been done. 3/8" iron valve guides installed in the heads from the factory. Casting number is P4532693. These heads are cast to use T&D or Jesel rocker arm systems.

I can send additional pictures for interested buyers.

Price is $1,100 plus shipping.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a used electric puller fan and controller. The parts are in nice shape. Overall measurements are 16.75" x 16.25" x 4.0". The fan blades themselves are 15" diameter.

Price is $55 plus shipping.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have 12 new Mopar Performance forged flat top pistons and pins. There are 3 different part numbers. There is not one complete set. Here is what I have.

P4876976 – Quantity of 6. Specs are 4.060” bore & ~ 1.67” compression height. These pistons are for a 0.060” overbore 360 with the stock stroke crankshaft or a 0.020” overbore 340 using a 3.58 stroke crankshaft.
Price for the 6 new forged pistons is $260 shipped.

P4876978 – Quantity of 4. Specs are 4.030” bore and ~ 1.67” compression height, These pistons are for a 0.030” overbore 360 with the stock stroke crankshaft
Price for the 4 new forged pistons is $160 shipped.

P5007413 – Quantity of 2. Specs are 4.030” bore and ~ 1.47” compression height, These pistons are for a 0.030” overbore 360 with a 4.00” stroke crankshaft.
Price for the 2 new forged pistons is $80 shipped.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have 12 new Mopar 1.5 ratio roller rocker arms for W2 econo heads. There are 4 left intake rockers and 8 exhaust rockers. I do not have any right rocker arms. All rockers are new. Some pictures of the rocker arms posted here.

Price for the 12 is $495 shipped to the lower 48 states. I will ship internationally for the extra shipping cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I also have some new spare 1.5 ratio exhaust roller rockers for W2 race heads. Contact me if you need any.

New Mopar Performance W2 /W5 exhaust roller rockers. I have quite a few of these so if you need more than one just ask.

Price is $38 each shipped in the lower 48 states.
Set of eight rockers is $280 shipped in the lower 48 states.


I will ship internationally for the additional cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new PRW 1.6 ratio roller rocker arm kit containing all parts needed to install these rocker arms including steel bushed rocker arms, rocker arm shafts, spacers, shims, adjusters, steel shaft hold downs and hold down hardware. This kit is new in the box and is PRW part # 3231812.

Price is $490 shipped in the lower 48 states.

I will ship internationally for the additional shipping cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new set of 16 new Erson big block Mopar roller rockers in their original box. These are 1.6 ratio and have needle roller bearings that ride on the rocker arm shaft. These rockers are USA made, and are very strong and are well constructed. They are not designed for pushrod oiling.

Note I do not have the shafts for these rocker arms. These rockers use an 11/16” hardened shaft that oil the rockers through the head pedestal.

These rocker arms are very difficult to find. Price is $480 for the 16 rocker arms shipped in the lower 48 states. I will ship internationally for the extra shipping cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new set of 8 Mopar Performance pistons and wrist pins Mopar part# P4876973 for a 3.454” stroke crankshaft. Specs are 4.060” bore, 1/16, 1/16, 3/16 ring set, 0.984” wrist pin, flat top with ~ 5 cc eyebrows, listed by Mopar as 10.5 compression ratio. Compression height is ~ 1.72” per my measurement.

Price for the set is $480 shipped in the lower 48 states. I will ship internationally for the extra cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a set of New BRC 4.030" forged flat top pistons and pins for a 3.79" stroke small block crankshaft. Compression height is ~ 1.57" and the ring lands are 1/16, 1/16 and 3/16. Appriximately 6cc valve reliefs.

These pistons can be used in aftermarket race blocks or stock 360/5.9 magnum engine blocks.

Price is $475 shipped in the lower 48 states. I will ship elsewhere for the added cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

New MSD Digital 6AL ignition module part #6425 $290

Used chrome ignition box $60

Prices include shipping in the lower 48 states. I will ship internationally for the added cost.


Email me at procketrichard@hotmail.com with any questions or for more pictures.
 

Spare set of Crane 1.50 ratio, big block rocker arms. SOLD, thanks.

Set of Harland Sharp hold downs. SOLD, Thanks.

I have a Holley Black Pump and freshly rebuilt regulator. I had these on my drag car for two seasons. Very good condition. No problems. I just needed to upgrade my fuel pump due to more power! $90 + shipping for both the regulator and pump. Summit sells the pump for $260 and the regulator for $46. My price for both the pump and regulator is just $90 plus shipping. I also have a blue pump that I've been using as my spare. I had it on the same car previously for about 6 seasons. This pump is $207 on Summit. Mine is $30 plus shipping. Best way to contact me is at mikeforsythe@yahoo.com

RCI 5 point racing harness, only used 4 times, SFI date expires in June, all hardware included
$40 shipped

Mopar Big-Block RB main bearing sets. Sets were installed bearing clearances checked and removed. PM me here if interested.

-Clevite MS-1795 V - Standard bearing size, $75 shipped
-King MB5116HP 001 (Sold)

King Rod bearing sets for Chevy Rod Journal Size. Both sets were installed bearing clearances checked and removed.

-King CR808HPN 010 - .010 undersize $50 shipped
-King CR808HPN 011 - .011 undersize $50 shipped

For Sale two sets of 8 3/4 gears: 4.86s for 489 housing / 4.88s for 742 housing ... gears are in excellent condition $100 each or trade for 4.56s for a 489 housing shipping extra lbvracing@aol.com or pm

I have 11 pairs (one complete engine set plus 3 spare pairs) of new Mopar Performance solid roller lifters for small block Mopar race blocks still in their packages. I took one pair to photograph. Part number is P5249584. The roller wheel size is 0.80”.

The price for the 11 pairs is $650 shipped in the lower 48 States.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

for sale 1 moroso electric water pump that bolts to water pump housing $100.00 . 1 ultradine flat tappett solid cam and lifters 612 lift cam grind # 309-f8 needs reground $125.00 . 1 indy roller rocker assembly needs shafts $200.00 can send pic 2 cell phone 334-885-8002

I have a couple pairs of Crane big block rocker arms with 0.290 offset. This is a little bit more offset than stock. Original application was Stage V heads but people also use these on stock heads to pick up a little bit of pushrod clearance on the intakes. One pair is 1.50 ratio, the other pair is 1.60 ratio. Asking $40 per pair plus shipping. PM me on the board. PayPal preferred for payment. Thanks.

I have 6 of the Crane nodular iron rocker arms. Some of these are new, some are very lightly used. The used ones do not have any galling or damage in the shaft area. Five are right handed, one is left handed. I'd like to sell all of them for $100 but I could split them up. PM me on the board, PayPal preferred for shipping.

NOW ONLY $60.00 INCLUDES SHIPPING!!!


I have a NEW (out dated) set of Pro1 5-pt Harness.

Brand: Pro1
Color: Black
Hardware: Black
Mounting: Bolt-In/Wrap around
Size: 3” Shoulder/Lap & 2” Submarine Belt
Adjustment: PULL UP!!!
Logo: FIGHT CANCER!!!


$60.00 includes shipping in the lower 48!

PM me if interested.

SOLD

Holley 950 HP DoublePumper CARBURETOR
List Number 80496
Rebuilt ready to go
$400 obo plus the ride
paypal or usps money order accepted
located 99323 SE WA

Comp Cams 735-16 Titanium retainers. New, never used, designed for triple springs with 0.050 extra installed height. These retainers provide a 2.000 installed height on Indy heads when used with the Manley 13198 locks. I used this combination on my 514 race engine to run 0.800 lift with a triple spring. These retainers were spares that never got used. The retainers are $388 new from Summit, I'll sell these for $200, shipping included in the US. PM me on the board, PayPal preferred for payment. Thanks.

One pair of new 440Source rocker arms. 1.70 ratio. Standard big block offset. This is a spare set that I had, engine is gone so I no longer need the spares. Sell the pair for $40 including shipping. PM me on the board. PayPal preferred for payment. Thanks.

Component Drive Systems gear drive for Gen III Hemi.
Fits ProCharger F1and F2 series head units. F3 can be accommodated with correct mounting plate.
Including all hardware, block mounts, standoffs, couplings, alternator mounts and drive. Also included is correct ATI damper.
All new, mocked up but never ran.
$3000 PM me here. Located in NW Indiana. SOLD.

These sell for $2800 for 4 wheels will sell for $2300 little dusty
2 each 15 x 10 and 2 each 15 x 3 1/2 plus shipping

blewbyu2bad@aol.com

Brand new Hooker Super Comp Fenderwell headers for A Body
$700.00 plus shipping

blewbyu2bad@aol.com

Brand new seats still in wrappers $1000 new sell for $750 plus shipping blewbyu2bad@aol.com

PAC solid roller valve springs, sold as Trick Flow TFS-16318. SOLD, Thanks.

New Comp 26986-16 valve springs with 787-16 steel retainers. SOLD, Thanks.

New Comp 26094 valve springs. These are dual springs, 1.55 OD, max lift is 0.640. 180 lbs at 1.900 installed height, 460 at 1.275, coil bind at 1.200. These would work with a hyd roller cam in the 0.600 lift range. $370 at Summit, I'm asking $200 for the springs plus $10 for shipping. PM me on the board, PayPal preferred for payment.

Comp Cams tool steel retainers for dual springs. SOLD, Thanks.

SPRING GARAGE HOUSEKEEPING

Thank you Moparts for the Ad
Time to get somethings out of the garage to someone who can use them.
All items plus shipping from 61073 unless noted
Ship or can meet within 35 miles of Rockford, IL
Cashier's Check or Money Order

One Set of LY Connecting Rods - $120
7 Quart Pan with Stroker Windage Tray and Pickup - $100
Chenoweth Girdle - 3/8" Thick Plate, Main Studs, Nuts and shims - $275
New Milodon 18320 Big Block Oil Pickup 7-3/4" - $45

Please message me on the Board
Thanks for looking, John

SPRING GARAGE HOUSEKEEPING

Thank you Moparts for the Ad
Time to get somethings out of the garage to someone who can use them.
All items plus shipping from 61073 unless noted
Ship or can meet within 35 miles of Rockford, IL
Cashier's Check or Money Order

Pair AFCO Leaf Spring Sliders 20236S - $130
Pair Rancho RS99116 Single Adjustable Rear Shocks 16-1/2" to 22-1/2" Eye to Eye - $90
Mopar Alternator with Moroso 64840 Large Pulley - $50
Autometer 3431 Water Temp Gauge - New in Box - $80

Please message me on the Board
Thanks for looking, John

SPRING GARAGE HOUSEKEEPING

Thank you Moparts for the Ad
Time to get somethings out of the garage to someone who can use them.
All items plus shipping from 61073 unless noted
Ship or can meet within 35 miles of Rockford, IL
Cashier's Check or Money Order

Moroso 65961 Air Pan Kit for 4500 Dominator - New in Box $15
Accel Dual Point Distributor 30302 for 383/400 Low Deck - $35
Pair 452 Big Block Cylinder Heads - PICK UP ONLY - $90
Fiberglass (Not Plastic) Racing Seat with Cover - PICK UP ONLY - $50

Please message me on the Board
Thank you for looking, John

JW Ultrabell,flexplate and crank adapter to adapt a glide to big block mopar.
$550 + shipping.Venmo or paypal ok.707-478-6302

1 Pr. 15X4 Ansen aluminum slots, 4 1/2 inch bolt circle for Mopar or Ford, nice used condition, could use some polishing $800.00 for the pair (708) 288-2879

Used pair of Mickey Thompson 28x4.5x15 ET front drag tires. Were bought new in 2014 and used until 2017 when I went to a smaller tire. Have been stored in my garage under the steps since they were removed. Tires right around 200 passes on them. Asking $50 for the pair. Buyer must pick up in Keymar, MD or pay shipping cost.

Weldon 1100-A Pump &A2040 Regulator

Links:
https://www.weldonracing.com/store/1100-A-p56062401
https://www.weldonracing.com/store/A2040-Series-Bypass-Regulators-p56722017
Brought new 7/1/2022, used for 1 chassis dyno session, went in another direction. Fogged with Marvel Mystery Oil and put on shelf. Time to sell.
600.00$ Shipped lower 48 only.

PM me

MSD number 14 bushing from FBO $12 mailed US ( the dark bushing is out of my old MSD that I will include if you want it)

Vintage Moroso cool can, nice used condition $125.00 (708) 288-2879

New set of K1 4340 H-beam Big block Mopar connecting rods

7.000 length 2.200 rod journal .990 pin ARP2000 bolts (stock mopar width).

These rods allow offset grinding your stock 440 crank rod journals to increase stroke from 3.750 to 3.925 inches

The rods with increase stroke yield the following performance benefits.

1) Increase displacement of 20 cubic inches
2) Reduction in rotating weight (weight off crank journals/bearings plus light weight rod big end)
3) Improved rod/stroke ratio
4) Reduction in reciprocating weight (small end of rod plus lower compression height piston plus light .990 pin)
5) reduce rod bearing speeds

$585 plus shipping (I've had these several years and would likely be more than double this price today)

thanks

rapid340@yahoo.com

NOS Weiand 440 Tunnel Ram, Some light surface oxidation in spots, Never installed. $450 + Shipping , PM me here if interested

B1 cylinder heads with rocker shafts and stands. I received these in a package deal, don't really know any history on them, or what valve springs are on them $3,000 OBO. You can PM me with any questions.

18 gauge steel, -10AN female fittings x3. 12x12x12 $129 + shipping. PayPal FF or postal money order. PM me here please.

-10AN fittings on red ends. $49 + shipping, PayPal FF or postal money order. PM me here please.

2'-2 1/8' Step, Very Solid, Shiny Finish, Some Bluing, Evac Tubes and Breathers.
Also fit RB Engine with RMS or other Coil Over.
Were in my Demon with Rb and Stage 6 Heads

$900 Pick Up in Maryland DC Suburbs

$1200 new with $200 shipping

will add Photos

Chrysler aluminum, electronic, tach drive distributor #4120942 for RB motor in excellent condition, just removed from my race motor. $325 shipped.