Eicke "Chev-Par" Pro Stock block
#3208302
01/26/24 02:24 PM
01/26/24 02:24 PM
|
Joined: Dec 2021
Posts: 1,130 Loudoun County, VA
Brad_Haak
OP
super stock
|
OP
super stock
Joined: Dec 2021
Posts: 1,130
Loudoun County, VA
|
Y'all remember when the Dale Eicke-run Mopar NHRA Pro Stock team was basically using a GM block as the basis for their "Chev-Par" engine? Chad Speier posted a pic of one showing lots of details of what they did in the valley for oil control and drain-back. First thing I noticed was... aluminum main caps, which I wasn't aware were used in engines of this caliber. I hadn't seen them used other than as a Band-Aid for those of us still running stock OEM Mopar big blocks.
2021 Challenger 6.4L Scat Pack 1320 100% stock: 1.680, 11.894 at 113.75 (DA 175 ft) weight reduction, wheels, tires, Hellcat air box: 1.661, 11.686 at 115.97 (DA 710 ft)
1973 Challenger 452 ci street/strip [2008] pump gas, DOT radials: 1.454, 10.523 at 126.44 (DA 514 ft)
|
|
|
Re: Eicke "Chev-Par" Pro Stock block
[Re: Brad_Haak]
#3208332
01/26/24 05:12 PM
01/26/24 05:12 PM
|
Joined: Jan 2003
Posts: 2,932 Finalnd, Perkele
jyrki
master
|
master
Joined: Jan 2003
Posts: 2,932
Finalnd, Perkele
|
I believe Wayne County tried to develope their 4.9" sore spacing block also on a GM style aftermarket block. They still tried to use a B1 TS style head though.
Plynouth VIP '67 TT IC EFI
|
|
|
Re: Eicke "Chev-Par" Pro Stock block
[Re: jyrki]
#3211677
02/07/24 09:05 PM
02/07/24 09:05 PM
|
Joined: Jan 2003
Posts: 6,142 Melbourne , Australia
LA360
master
|
master
Joined: Jan 2003
Posts: 6,142
Melbourne , Australia
|
Before this engine, it was B1 TS heads on a Phoenix block, which was closer to a chevrolet block, than it was a Mopar block.
Alan Jones
|
|
|
Re: Eicke "Chev-Par" Pro Stock block
[Re: Brad_Haak]
#3211861
02/08/24 09:45 AM
02/08/24 09:45 AM
|
Joined: Jan 2003
Posts: 13,365 Marion, South Carolina [><]
an8sec70cuda
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 13,365
Marion, South Carolina [><]
|
What's funny is all the internet/facebook "experts" commenting on the cylinder head pics talking about nitrous.
CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax
|
|
|
Re: Eicke "Chev-Par" Pro Stock block
[Re: an8sec70cuda]
#3211967
02/08/24 01:37 PM
02/08/24 01:37 PM
|
Joined: Jan 2003
Posts: 19,367 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,367
Las Vegas
|
What's funny is all the internet/facebook "experts" commenting on the cylinder head pics talking about nitrous. Because they see the Steam hole lines and assume its a nitrous deal....I have been friends with the Koffels for a long time and the truth is not as exciting as the stories I suppose. Ask KB racing about their backfire through the scoop, they share a common failure point with the Mopar guys.
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
Re: Eicke "Chev-Par" Pro Stock block
[Re: Al_Alguire]
#3212004
02/08/24 03:28 PM
02/08/24 03:28 PM
|
Joined: Jan 2003
Posts: 13,365 Marion, South Carolina [><]
an8sec70cuda
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 13,365
Marion, South Carolina [><]
|
What's funny is all the internet/facebook "experts" commenting on the cylinder head pics talking about nitrous. Because they see the Steam hole lines and assume its a nitrous deal....I have been friends with the Koffels for a long time and the truth is not as exciting as the stories I suppose. Ask KB racing about their backfire through the scoop, they share a common failure point with the Mopar guys. Exactly. People making assumptions b/c they don't have a clue what they're looking at.
CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax
|
|
|
Re: Eicke "Chev-Par" Pro Stock block
[Re: an8sec70cuda]
#3212061
02/08/24 06:55 PM
02/08/24 06:55 PM
|
Joined: Jan 2003
Posts: 6,142 Melbourne , Australia
LA360
master
|
master
Joined: Jan 2003
Posts: 6,142
Melbourne , Australia
|
Funny thing is if they took the time to look, they'd see that its plumbed over the exhaust. The internet is dumb sometimes
Alan Jones
|
|
|
Re: Eicke "Chev-Par" Pro Stock block
[Re: LA360]
#3212188
02/09/24 01:01 PM
02/09/24 01:01 PM
|
Joined: Jan 2003
Posts: 19,367 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,367
Las Vegas
|
The internet is dumb sometimes Should say ALL the time
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
Re: Eicke "Chev-Par" Pro Stock block
[Re: Al_Alguire]
#3212199
02/09/24 01:50 PM
02/09/24 01:50 PM
|
Joined: Aug 2019
Posts: 9,471 Super Spudsville
Mr PotatoHead
Half Baked
|
Half Baked
Joined: Aug 2019
Posts: 9,471
Super Spudsville
|
Do we really want to bring MFG. back to the USA. The USA internet is dumb sometimes Should say ALL the time
STOP POTATO HATE!
|
|
|
|
|