Re: Big block hydraulic roller lifters, which ones are best?
[Re: mxbeep]
#3033177
04/13/22 02:12 PM
04/13/22 02:12 PM
|
Joined: Dec 2013
Posts: 4,684 Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,684
Wichita
|
Comp hydraulic rollers are garbage. Had a friend with some in his BB Dart and they made lots of noise. Swapped to Howards.
We used Howards (Morel) and they have been flawless. 7,000 miles over 6 years and hundreds of dragstrip passes.
'63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.
|
|
|
Re: Big block hydraulic roller lifters, which ones are best?
[Re: GY3]
#3033181
04/13/22 02:24 PM
04/13/22 02:24 PM
|
Joined: Jul 2005
Posts: 1,624 qc
mxbeep
OP
top fuel
|
OP
top fuel
Joined: Jul 2005
Posts: 1,624
qc
|
Comp hydraulic rollers are garbage. Had a friend with some in his BB Dart and they made lots of noise. Swapped to Howards.
We used Howards (Morel) and they have been flawless. 7,000 miles over 6 years and hundreds of dragstrip passes. where did you purchase your Howards hydraulic rollers? all i can find are solid rollers
|
|
|
Re: Big block hydraulic roller lifters, which ones are best?
[Re: mxbeep]
#3033186
04/13/22 02:30 PM
04/13/22 02:30 PM
|
Joined: Dec 2013
Posts: 4,684 Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,684
Wichita
|
Comp hydraulic rollers are garbage. Had a friend with some in his BB Dart and they made lots of noise. Swapped to Howards.
We used Howards (Morel) and they have been flawless. 7,000 miles over 6 years and hundreds of dragstrip passes. where did you purchase your Howards hydraulic rollers? all i can find are solid rollers It's been long enough I honestly don't recall. I bought a lot of stuff from Competition Products but not sure that's where I bought these. Edit: After looking at their website they show them but they are currently out of stock.
Last edited by GY3; 04/13/22 02:32 PM.
'63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.
|
|
|
Re: Big block hydraulic roller lifters, which ones are best?
[Re: mopar873]
#3033204
04/13/22 03:12 PM
04/13/22 03:12 PM
|
Joined: Aug 2011
Posts: 2,864 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,864
Pattison Texas
|
Johnson lifters, NOT Johnson hylift
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: Big block hydraulic roller lifters, which ones are best?
[Re: CSK]
#3033221
04/13/22 04:08 PM
04/13/22 04:08 PM
|
Joined: Jan 2003
Posts: 13,369 Marion, South Carolina [><]
an8sec70cuda
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 13,369
Marion, South Carolina [><]
|
I have a set of BB hyd. roller lifters here from Scorpion that I got almost 10 years ago. Got them from Dan (DRAM) because he said they were good quality. I haven't used them so I can't speak on any personal experience.
CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax
|
|
|
|
|