Re: Low Deck BB in Comp Elim?
[Re: reknapp52]
#3008147
01/23/22 12:36 PM
01/23/22 12:36 PM
|
Joined: Aug 2003
Posts: 1,313 Charlotte, NC
LSP
pro stock
|
pro stock
Joined: Aug 2003
Posts: 1,313
Charlotte, NC
|
Is this idea even worth discussing, or would it just be a totally futile effort? And yes, I know it would be expensive. What particular class are you thinking about?
|
|
|
Re: Low Deck BB in Comp Elim?
[Re: SCDaytona]
#3008277
01/23/22 06:44 PM
01/23/22 06:44 PM
|
Joined: Jan 2003
Posts: 6,136 Melbourne , Australia
LA360
master
|
master
Joined: Jan 2003
Posts: 6,136
Melbourne , Australia
|
Has anyone built a over 400" P7 motor making over 1K Horsepower? I don't think anyone has attempted it. Any of the larger cube XR2 or Ernie Elliot block based P7 deals I have seen have been power adder combinations. I am in Australia, so I wouldn't see any where near the cars you guys would. The Ritter blocks were designed primarily for the P7 head, the wedge head option was made to work with the casting. Either way, they come in 9.6" or decked down to 9.2" As has been mentioned, Slawko and CFE have programs for the P7 head, where they shift the intake valve etc. I think any decent shop with experience in SB2.2 heads would be able to tackle a set of P7s. They won't out perform a P5 head. A W8 engine can make over 1000 with a single 4 barrel intake, the P7 is a better head IMO
Last edited by LA360; 01/23/22 06:48 PM.
Alan Jones
|
|
|
Re: Low Deck BB in Comp Elim?
[Re: reknapp52]
#3010539
01/30/22 01:52 PM
01/30/22 01:52 PM
|
Joined: Dec 2021
Posts: 1,118 Loudoun County, VA
Brad_Haak
super stock
|
super stock
Joined: Dec 2021
Posts: 1,118
Loudoun County, VA
|
Came across this in-car vid by chance yesterday and thought it would be a nice addition to this thread https://www.youtube.com/watch?v=r8fBmAqpSBI
2021 Challenger 6.4L Scat Pack 1320 100% stock: 1.680, 11.894 at 113.75 (DA 175 ft) weight reduction, wheels, tires, Hellcat air box: 1.661, 11.686 at 115.97 (DA 710 ft)
1973 Challenger 452 ci street/strip [2008] pump gas, DOT radials: 1.454, 10.523 at 126.44 (DA 514 ft)
|
|
|
Re: Low Deck BB in Comp Elim?
[Re: Cab_Burge]
#3010636
01/30/22 07:19 PM
01/30/22 07:19 PM
|
Joined: Jan 2003
Posts: 6,136 Melbourne , Australia
LA360
master
|
master
Joined: Jan 2003
Posts: 6,136
Melbourne , Australia
|
Comp Eliminator is one of the few areas in Drag Racing left that is still innovative. It takes a certain type of person to race in the class.
Alan Jones
|
|
|
Re: Low Deck BB in Comp Elim?
[Re: Brad_Haak]
#3010829
01/31/22 01:31 PM
01/31/22 01:31 PM
|
Joined: Jan 2003
Posts: 19,361 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,361
Las Vegas
|
The red Vette sees that RPM, these days those little engine like those of Warter 10,500 is on the short side. Ours is 400" and sees that RPM. Still hang around alot of comp stuff and most of the fast smallish stuff is 11,000+
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
|
|