6.760 H Beam rod weight - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 6.760 H Beam rod weight

Print Thread

6.760 H Beam rod weight #2925780 05/23/21 11:10 AM 05/23/21 11:10 AM
Joined: Apr 2016 Posts: 108 WNY Moparrob68 OP member
Moparrob68 OP member Joined: Apr 2016 Posts: 108 WNY	I need 2 replacement 6.760 H beam rods and am having a hard time finding any with the same weight. The rods I have are 750 grams with ARP 2000 1.60 bolts. Most of the rod listings for a Mopar journal are 830 to 880 grams. 440 Source says their rods are the lightest but don't list a weight on the website. Does anyone know the weight of the 440 Source 6.760 H Beam rod. Can anyone identify this rod?

Re: 6.760 H Beam rod weight [Re: Moparrob68] #2925790 05/23/21 11:34 AM 05/23/21 11:34 AM
Joined: Jan 2013 Posts: 289 St.Pete,Florida L lancer493 enthusiast
lancer493 enthusiast L Joined: Jan 2013 Posts: 289 St.Pete,Florida	440 source 6760H w/.990 pin, ARP2000 bolts,Mopar big end. Total weight 745grams. Big end 518grams. Pin end 227grams. Went to BME aluminum rods, same configuration,only about 30grms lighter but supposed to be a better shock absorber. Time will tell. Bill

Re: 6.760 H Beam rod weight [Re: lancer493] #2926078 05/24/21 09:52 AM 05/24/21 09:52 AM
Joined: Aug 2009 Posts: 2,039 Mooresburg, Tn ' '72CudaRacer top fuel
'72CudaRacer top fuel ' Joined: Aug 2009 Posts: 2,039 Mooresburg, Tn	I checked a Eagle rod & a Ohio Crankshaft rod, both H-beam, 6.760" long, with .990 pins & Mopar big end. Eagle w/ Carrillo bolts 881g, OCS w/ ARP 2000 bolts 844g. Brian Last edited by '72CudaRacer; 05/24/21 09:53 AM.

Re: 6.760 H Beam rod weight [Re: '72CudaRacer] #2926109 05/24/21 11:22 AM 05/24/21 11:22 AM
Joined: Jun 2008 Posts: 3,916 usa L lewtot184 master
lewtot184 master L Joined: Jun 2008 Posts: 3,916 usa	i'm using some 440 source rods. .990 pin, 734 grams, arp bolts.

Re: 6.760 H Beam rod weight [Re: lewtot184] #2926255 05/24/21 06:55 PM 05/24/21 06:55 PM
Joined: Apr 2016 Posts: 108 WNY Moparrob68 OP member
Moparrob68 OP member Joined: Apr 2016 Posts: 108 WNY	Does anyone have any 440 Source 6.760 rods for sale? I need 2 rods or a whole set to get my motor back together for our first race next week and don't have time to rebalance the crank. I called 440 Source and they don't carry that style anymore.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1