E-body reverse light hole - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer E-body reverse light hole

Print Thread

E-body reverse light hole #2860432 12/15/20 07:02 PM 12/15/20 07:02 PM
Joined: Feb 2007 Posts: 898 iowa copchaser OP super stock
copchaser OP super stock Joined: Feb 2007 Posts: 898 iowa	Looking for the hole diameter for the reverse light on a 70 Cuda. I'm change one over from a auto to a 4-speed need to hole size in the firewall. Thanks. Last edited by copchaser; 12/15/20 07:02 PM.

Re: E-body reverse light hole [Re: copchaser] #2860628 12/16/20 09:51 AM 12/16/20 09:51 AM
Joined: Jan 2003 Posts: 4,114 MD floyd master
floyd master Joined: Jan 2003 Posts: 4,114 MD	Scroll down on page one of this awesome post: https://forum.e-bodies.org/referenc...ocations-firewall-door-interior-ect/303/

Re: E-body reverse light hole [Re: floyd] #2860651 12/16/20 10:35 AM 12/16/20 10:35 AM
Joined: Feb 2007 Posts: 898 iowa copchaser OP super stock
copchaser OP super stock Joined: Feb 2007 Posts: 898 iowa	thanks

Re: E-body reverse light hole [Re: copchaser] #2860676 12/16/20 11:21 AM 12/16/20 11:21 AM
Joined: Nov 2003 Posts: 2,937 GA roadrunninMark master
roadrunninMark master Joined: Nov 2003 Posts: 2,937 GA	Isn't that the shaker cable hole, not the dash mounted reverse light? (unless it saw double duty for non shaker cars?)

Re: E-body reverse light hole [Re: roadrunninMark] #2860767 12/16/20 02:08 PM 12/16/20 02:08 PM
Joined: Jan 2003 Posts: 4,114 MD floyd master
floyd master Joined: Jan 2003 Posts: 4,114 MD	Sorry, I misread your question and was pointing you to the hole in the dash for the light. Here’s what you need: https://board.moparts.org/ubbthread...allenger-reverse-light-grommet-hole.html Believe you need a 3/4” diameter hole for a 70 harness. Last edited by floyd; 12/16/20 02:09 PM.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1