Posted By: copchaser
E-body reverse light hole - 12/15/20 11:02 PM
Looking for the hole diameter for the reverse light on a 70 Cuda. I'm change one over from a auto to a 4-speed need to hole size in the firewall. Thanks.
Posted By: floyd
Re: E-body reverse light hole - 12/16/20 01:51 PM
Posted By: roadrunninMark
Re: E-body reverse light hole - 12/16/20 03:21 PM
Isn't that the shaker cable hole, not the dash mounted reverse light? (unless it saw double duty for non shaker cars?)
Posted By: floyd
Re: E-body reverse light hole - 12/16/20 06:08 PM
Sorry, I misread your question and was pointing you to the hole in the dash for the light.
Here’s what you need:
https://board.moparts.org/ubbthread...allenger-reverse-light-grommet-hole.htmlBelieve you need a 3/4” diameter hole for a 70 harness.