arp studs - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech arp studs

Print Thread

arp studs #2760858 04/06/20 06:22 PM 04/06/20 06:22 PM
Joined: Nov 2004 Posts: 7,274 s.w.fl B bonefish OP master
bonefish OP master B Joined: Nov 2004 Posts: 7,274 s.w.fl	i have enuff studs to use on my crank that are markes ARP left over from anothe project i also have some marked ARP 2000,i know what the 2000 is but the other studs that look identical im not shure are they the 8740?

Re: arp studs [Re: bonefish] #2760869 04/06/20 07:27 PM 04/06/20 07:27 PM
Joined: Oct 2006 Posts: 1,264 New York, USA Chargerfan68 pro stock
Chargerfan68 pro stock Joined: Oct 2006 Posts: 1,264 New York, USA	Main studs or conn rod bolts? All the sets i’ve ever worked with had no marKings on the studs besides ARP. On the rod bolts, that’s a diff story. I’ve had them marked 2000 for that series. 8740 for those. I’ve had arp eagle 8740 on eagle rods etc.. main studs, i’ve never seen them marked with the grading. 1.50 60Ft. , 10.75@ 127MPH Hauling 3900 LBS.

Re: arp studs [Re: Chargerfan68] #2760872 04/06/20 07:38 PM 04/06/20 07:38 PM
Joined: Nov 2004 Posts: 7,274 s.w.fl B bonefish OP master
bonefish OP master B Joined: Nov 2004 Posts: 7,274 s.w.fl	main studs,if they are marked just ARP dose that mean they are 8740 ,if it does they call for 120 lbs torque on the nuts

Re: arp studs [Re: bonefish] #2761039 04/07/20 10:08 AM 04/07/20 10:08 AM
Joined: May 2011 Posts: 625 Oakville, Wa HOTMOPR mopar
HOTMOPR mopar Joined: May 2011 Posts: 625 Oakville, Wa	I just installed new sets of ARP studs on my 400 the main studs were 110# torque and the heads studs were 80# torque 67 Barracuda, 470" B, Glide, FuelTech FT600, Precision, Ptc, QA1, Calvert, Smith racecraft, Afco, Dana 60. 275 radials

Re: arp studs [Re: HOTMOPR] #2761121 04/07/20 01:49 PM 04/07/20 01:49 PM
Joined: Aug 2003 Posts: 43,244 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,244 Bend,OR USA	Originally Posted by HOTMOPR I just installed new sets of ARP studs on my 400 the main studs were 110# torque and the heads studs were 80# torque That is for using ARP moly lube torque specs. Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1