Re: Leaf Spring slider Tech
[Re: justinp61]
#2756520
03/27/20 03:42 PM
03/27/20 03:42 PM
|
Joined: Oct 2011
Posts: 3,036 bean town ....Ca
WHITEDART
OP
master
|
OP
master
Joined: Oct 2011
Posts: 3,036
bean town ....Ca
|
Speedway Sales them .. Make sure at ride height your slider is sitting more towards the back... Even with a very tight shock settings my car will pull the slider forward 3". On an 1/8 mile pass... https://youtu.be/ym-mamh17QQ
Last edited by WHITEDART; 03/27/20 03:50 PM.
In the 8s N/A.with Brett miller W8's 5.07 at 133 at 2700lb
|
|
|
Re: Leaf Spring slider Tech
[Re: topbrent]
#2756540
03/27/20 04:42 PM
03/27/20 04:42 PM
|
Joined: Jul 2004
Posts: 19,317 State of confusion
Thumperdart
I Live Here
|
I Live Here
Joined: Jul 2004
Posts: 19,317
State of confusion
|
These are mounted too far forward and you can see the dr. side hit the ft. of the slider bracket.......should be 3/4's back or more to compensate for extension not compression...
72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....
|
|
|
Re: Leaf Spring slider Tech
[Re: Thumperdart]
#2756558
03/27/20 05:26 PM
03/27/20 05:26 PM
|
Joined: May 2011
Posts: 625 Oakville, Wa
HOTMOPR
mopar
|
mopar
Joined: May 2011
Posts: 625
Oakville, Wa
|
Has anyone tried the sliders that have the extention built into them? So they allow more separation during the launch.. Ill search the pic and info https://www.lpracing.net/product-pa...Mm6sS4yywECvoidudbRbJzd-Eh3PbrHTc7YfMMwg
Last edited by HOTMOPR; 03/27/20 05:31 PM.
67 Barracuda, 470" B, Glide, FuelTech FT600, Precision, Ptc, QA1, Calvert, Smith racecraft, Afco, Dana 60. 275 radials
|
|
|
Re: Leaf Spring slider Tech
[Re: HOTMOPR]
#2756568
03/27/20 06:00 PM
03/27/20 06:00 PM
|
Joined: May 2011
Posts: 625 Oakville, Wa
HOTMOPR
mopar
|
mopar
Joined: May 2011
Posts: 625
Oakville, Wa
|
67 Barracuda, 470" B, Glide, FuelTech FT600, Precision, Ptc, QA1, Calvert, Smith racecraft, Afco, Dana 60. 275 radials
|
|
|
Re: Leaf Spring slider Tech
[Re: HOTMOPR]
#2756584
03/27/20 06:40 PM
03/27/20 06:40 PM
|
Joined: Dec 2007
Posts: 12,587 Great Neck,LI,new york
hemi-itis
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 12,587
Great Neck,LI,new york
|
I have never seen anything like these before
Last edited by hemi-itis; 03/27/20 10:26 PM.
HEMI-ITIS has no cure. My condition is fully BLOWN!!
|
|
|
Re: Leaf Spring slider Tech
[Re: LA360]
#2757605
03/30/20 02:11 PM
03/30/20 02:11 PM
|
Joined: May 2006
Posts: 1,260 New Mexico
Adobedude
pro stock
|
pro stock
Joined: May 2006
Posts: 1,260
New Mexico
|
My Brackets....After I cleaned em up, they bolt on my Dakota
2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.
|
|
|
Re: Leaf Spring slider Tech
[Re: XXHEMI]
#2758780
04/02/20 10:12 AM
04/02/20 10:12 AM
|
Joined: May 2011
Posts: 625 Oakville, Wa
HOTMOPR
mopar
|
mopar
Joined: May 2011
Posts: 625
Oakville, Wa
|
They should plant quicker and have a lot more extention. Depending on shock settings of course. Id like to try a set but cant justify the costs right now. With whats going on..
67 Barracuda, 470" B, Glide, FuelTech FT600, Precision, Ptc, QA1, Calvert, Smith racecraft, Afco, Dana 60. 275 radials
|
|
|
Re: Leaf Spring slider Tech
[Re: hemi-itis]
#2758796
04/02/20 10:41 AM
04/02/20 10:41 AM
|
Joined: May 2011
Posts: 625 Oakville, Wa
HOTMOPR
mopar
|
mopar
Joined: May 2011
Posts: 625
Oakville, Wa
|
On that same not has anyone used the Calvert slanted sliders? I bought the US MADE speedway sliders,they look the same,they could be the same and I will never know. The bolts and rollers that came with the sliders are for S/S springs. I had to buy the kit from Calvert to fit his slider. I should have bought the Cals in the 1st plce I run calverts slanted sliders..
67 Barracuda, 470" B, Glide, FuelTech FT600, Precision, Ptc, QA1, Calvert, Smith racecraft, Afco, Dana 60. 275 radials
|
|
|
Re: Leaf Spring slider Tech
[Re: HOTMOPR]
#2758799
04/02/20 10:54 AM
04/02/20 10:54 AM
|
Joined: Dec 2007
Posts: 12,587 Great Neck,LI,new york
hemi-itis
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 12,587
Great Neck,LI,new york
|
On that same not has anyone used the Calvert slanted sliders? I bought the US MADE speedway sliders,they look the same,they could be the same and I will never know. The bolts and rollers that came with the sliders are for S/S springs. I had to buy the kit from Calvert to fit his slider. I should have bought the Cals in the 1st plce I run calverts slanted sliders.. I'd bet the hardware was correct the 1st time also............
HEMI-ITIS has no cure. My condition is fully BLOWN!!
|
|
|
Re: Leaf Spring slider Tech
[Re: hemi-itis]
#2758801
04/02/20 10:58 AM
04/02/20 10:58 AM
|
Joined: May 2011
Posts: 625 Oakville, Wa
HOTMOPR
mopar
|
mopar
Joined: May 2011
Posts: 625
Oakville, Wa
|
On that same not has anyone used the Calvert slanted sliders? I bought the US MADE speedway sliders,they look the same,they could be the same and I will never know. The bolts and rollers that came with the sliders are for S/S springs. I had to buy the kit from Calvert to fit his slider. I should have bought the Cals in the 1st plce I run calverts slanted sliders.. I'd bet the hardware was correct the 1st time also............ Yes sir... llol
67 Barracuda, 470" B, Glide, FuelTech FT600, Precision, Ptc, QA1, Calvert, Smith racecraft, Afco, Dana 60. 275 radials
|
|
|
Re: Leaf Spring slider Tech
[Re: HOTMOPR]
#2758840
04/02/20 12:34 PM
04/02/20 12:34 PM
|
Joined: Dec 2007
Posts: 12,587 Great Neck,LI,new york
hemi-itis
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 12,587
Great Neck,LI,new york
|
[ On that same not has anyone used the Calvert slanted sliders? I bought the US MADE speedway sliders,they look the same,they could be the same and I will never know. The bolts and rollers that came with the sliders are for S/S springs. I had to buy the kit from Calvert to fit his slider. I should have bought the Cals in the 1st plce [/quote] I run calverts slanted sliders.. [/quote] I'd bet the hardware was correct the 1st time also............ [/quote] Yes sir... llol [/quote] I always do it the long/hard way.Very expensive learning curve and I'm not in the 8's..................Yet Wonder if the slanted is better than the level??????????
HEMI-ITIS has no cure. My condition is fully BLOWN!!
|
|
|
|
|