DANA ID - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech DANA ID

Print Thread

DANA ID #2681028 07/24/19 08:44 PM 07/24/19 08:44 PM
Joined: Oct 2008 Posts: 1,176 East Coast A A/MP OP super stock
A/MP OP super stock A Joined: Oct 2008 Posts: 1,176 East Coast	Sitting at my garage door is a newer Dana. A note on it says ,"late model Dana 60 from a late 90's early 2000 Dodge Ram and you fool around with hot rods so you can have it". It has a blue plastic filler cap on top of the center section. Very clean. Looks like very low miles. Is this a candidate for a cut down and modify for my next project? I'll get some pics later.

Re: DANA ID [Re: A/MP] #2681036 07/24/19 09:15 PM 07/24/19 09:15 PM
Joined: Dec 2004 Posts: 10,552 Rittman Ohio fourgearsavoy I Live Here
fourgearsavoy I Live Here Joined: Dec 2004 Posts: 10,552 Rittman Ohio	Originally Posted by A/MP Sitting at my garage door is a newer Dana. A note on it says ,"late model Dana 60 from a late 90's early 2000 Dodge Ram and you fool around with hot rods so you can have it". It has a blue plastic filler cap on top of the center section. Very clean. Looks like very low miles. Is this a candidate for a cut down and modify for my next project? I'll get some pics later. Wow sounds like the Karma wheel rolled your way Might have the large tubes but you can work around that. Gus 64 Plymouth Savoy 493 Indy EZ's by Nick at Compu-Flow 5-Speed Richmond faceplate Liberty box Dana 60

Re: DANA ID [Re: fourgearsavoy] #2681228 07/25/19 11:57 AM 07/25/19 11:57 AM
Joined: Sep 2003 Posts: 421 montana BANDIT mopar
BANDIT mopar Joined: Sep 2003 Posts: 421 montana	That blue plastic cap is where the speed sensor/ABS sensor went, but your description works too. Jim 64 Dodge Coronet 440. In progress 1998. Dodge Avenger. 8.35@165. 4400 DA 250” Neil and Parks Slip Joint. 7.36@183. 4600 DA 242" Mullis Dragster. 6.90@ 200mph

Re: DANA ID [Re: A/MP] #2681246 07/25/19 12:50 PM 07/25/19 12:50 PM
Joined: Oct 2014 Posts: 147 AZ squirrel member
squirrel member Joined: Oct 2014 Posts: 147 AZ	look at the housing where the tube meets the bearing, see if it looks like the bearing race spun and ate up the housing. Pretty common problem on the truck Danas.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1