Correct studs for 8 3/4 axle housing? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Correct studs for 8 3/4 axle housing?

Print Thread

Correct studs for 8 3/4 axle housing? #2586299 12/02/18 09:02 PM 12/02/18 09:02 PM
Joined: Jan 2003 Posts: 741 Citrus Heights, CA 6 69_Swinger OP super stock
69_Swinger OP super stock 6 Joined: Jan 2003 Posts: 741 Citrus Heights, CA	I bought a stripped 8 3/4 rearend for an a-body, and the PO had removed all the studs (pressed in on the ends of the axle tubes, and where the 3rd member mounts in). I had heard that Ford 9" was the same. I was thinking of going with either of these: https://www.summitracing.com/parts/aaf-all72040/overview/ https://www.summitracing.com/parts/axe-bs9500/overview/ Will these work? Are they also correct for the axle tube ends? Thanks! 67 Valiant /6 2-door (Father/Daughter project)

Re: Correct studs for 8 3/4 axle housing? [Re: 69_Swinger] #2586303 12/02/18 09:04 PM 12/02/18 09:04 PM
Joined: Jan 2003 Posts: 29,652 Hamtramck, PA A Alaskan_TA Fluffy Balladeer
Alaskan_TA Fluffy Balladeer A Joined: Jan 2003 Posts: 29,652 Hamtramck, PA	Doctor Diff has some if you want to check with him? www.doctordiff.com

Re: Correct studs for 8 3/4 axle housing? [Re: 69_Swinger] #2586309 12/02/18 09:17 PM 12/02/18 09:17 PM
Joined: Dec 2003 Posts: 22,696 Bitopia J jcc If you can't dazzle em with diamonds..
jcc If you can't dazzle em with diamonds.. J Joined: Dec 2003 Posts: 22,696 Bitopia	The correct axle end studs use a partial circle flange, different then the carrier studs. Reality check, that half the population is smarter then 50% of the people and it's a constantly contested fact.

Re: Correct studs for 8 3/4 axle housing? [Re: 69_Swinger] #2586335 12/02/18 09:59 PM 12/02/18 09:59 PM
Joined: Jan 2003 Posts: 741 Citrus Heights, CA 6 69_Swinger OP super stock
69_Swinger OP super stock 6 Joined: Jan 2003 Posts: 741 Citrus Heights, CA	Just ordered all of it from Dr. Diff. Thanks! 67 Valiant /6 2-door (Father/Daughter project)

Re: Correct studs for 8 3/4 axle housing? [Re: 69_Swinger] #2586594 12/03/18 02:07 PM 12/03/18 02:07 PM
Joined: Mar 2005 Posts: 792 Earth R Rob C super stock
Rob C super stock R Joined: Mar 2005 Posts: 792 Earth	Hate to jump in on the thread like this but I am in a similar boat. I have an 8-3/4 that has no studs where the center section goes. Where can I find these studs? TIA

Re: Correct studs for 8 3/4 axle housing? [Re: Rob C] #2586606 12/03/18 02:31 PM 12/03/18 02:31 PM
Joined: Sep 2003 Posts: 19,402 north of coder moparx "Butt Crack Bob"
moparx "Butt Crack Bob" Joined: Sep 2003 Posts: 19,402 north of coder	Originally Posted By Rob C Hate to jump in on the thread like this but I am in a similar boat. I have an 8-3/4 that has no studs where the center section goes. Where can I find these studs? TIA as said : DR DIFF. great guy to deal with !

Re: Correct studs for 8 3/4 axle housing? [Re: 69_Swinger] #2586654 12/03/18 03:52 PM 12/03/18 03:52 PM
Joined: Mar 2005 Posts: 792 Earth R Rob C super stock
Rob C super stock R Joined: Mar 2005 Posts: 792 Earth	Thank you moparx

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1