|
how do you test the
#2480684
04/10/18 07:49 PM
04/10/18 07:49 PM
|
Joined: May 2003
Posts: 1,527 Michigan
GoDartGo
OP
pro stock
|
OP
pro stock
Joined: May 2003
Posts: 1,527
Michigan
|
How do I test the control box? I got it new 7 years ago and never had any issues with it. It's the the orange control box and I'm not getting any spark. The coil is fairly new.
Last edited by GoDartGo; 04/10/18 07:49 PM.
|
|
|
Re: how do you test the
[Re: GoDartGo]
#2480717
04/10/18 08:52 PM
04/10/18 08:52 PM
|
Joined: Nov 2003
Posts: 36,041 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
You pretty much have to test/elim all but the box & I think O'reillys can test it. it has ran in the past with how you have it wired correct? 4 pin ECU/2 terminal ballast & it wont start so you subbed in the orange box to no avail? pull the yellow wire off of the "ign" terminal on the starter relay to disable the starter & with your VOM see if the coil positive primary terminal & the main feed wire at the ECU are hot (it is the "point" of the pentastar), might be blue/yellow or red. ohm the dist pickup. check the reluctor gap (should be "close" but not touching) & the spec is .008" with a brass feeler gauge. confirm the box is grounded (it usually is but I would check). this'll get us started.
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: how do you test the
[Re: rory73]
#2480768
04/10/18 10:05 PM
04/10/18 10:05 PM
|
Joined: Nov 2003
Posts: 36,041 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
^^^ Good info, thank you!
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: how do you test the
[Re: GoDartGo]
#2480916
04/11/18 03:47 AM
04/11/18 03:47 AM
|
Joined: Mar 2003
Posts: 4,848 Memphis
HemiRick
master
|
master
Joined: Mar 2003
Posts: 4,848
Memphis
|
Who here has even seen brass feeler gauges? Not I....
Take care, Rick 68 Coronet R/T 440 & 68 Charger 528 Hemi,and 5 Challengers! 6 cyl, 318, 360, 383, 451
|
|
|
Re: how do you test the
[Re: GoDartGo]
#2480970
04/11/18 10:42 AM
04/11/18 10:42 AM
|
Joined: Oct 2005
Posts: 9,031 Ontario, Canada
Stanton
Don't question me!
|
Don't question me!
Joined: Oct 2005
Posts: 9,031
Ontario, Canada
|
Who here has even seen brass feeler gauges? Not I.... I have a set!
|
|
|
Re: how do you test the
[Re: Stanton]
#2480975
04/11/18 10:50 AM
04/11/18 10:50 AM
|
Joined: Oct 2003
Posts: 11,702 W. Kentucky
justinp61
I Live Here
|
I Live Here
Joined: Oct 2003
Posts: 11,702
W. Kentucky
|
Who here has even seen brass feeler gauges? Not I.... I have a set! I have them too.
|
|
|
Re: how do you test the
[Re: justinp61]
#2480983
04/11/18 11:06 AM
04/11/18 11:06 AM
|
Joined: Oct 2011
Posts: 517 ND
dodgedon
mopar
|
mopar
Joined: Oct 2011
Posts: 517
ND
|
Every set I have has a few brass sizes in the mix.
67 Charger 383 auto 75 Dodge CNT 800 CAT Diesel 2012 Ram Crew cab 5.7 4x4
|
|
|
Re: how do you test the
[Re: dodgedon]
#2481205
04/11/18 06:26 PM
04/11/18 06:26 PM
|
Joined: Jan 2003
Posts: 5,141 East Aurora (Buffalo) NY
RoadRunner
master
|
master
Joined: Jan 2003
Posts: 5,141
East Aurora (Buffalo) NY
|
Every set I have has a few brass sizes in the mix. Same here. I have a set with several brass sizes int he mix.
68 Road Runner (383/4speed, post car w/decor pkg) - Major Project 69 Road Runner w/472 Hemi & 4 speed. 70 Challenger R/T SE EF8 w/ V9J, U - A32 - Major Project 2023 Ford Mach 1
|
|
|
|
|
|