plug wires, top three or four brands?
#2113297
07/19/16 02:20 PM
07/19/16 02:20 PM
|
Joined: Jan 2003
Posts: 10,011 Frostbitefalls MN (Rocky&Bullw...
gregsdart
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2003
Posts: 10,011
Frostbitefalls MN (Rocky&Bullw...
|
I saw Jegs plug wires , and at a 42$ price for 8.5 spiral core wires it sounds like a good deal. Also looking at other brands. I run alky and 15/1 compression, so I need something good. What say you?
Last edited by gregsdart; 07/19/16 02:20 PM.
8..603 156 mph best, 2905 lbs 549, indy 572-13, alky
|
|
|
Re: plug wires, top three or four brands?
[Re: gregsdart]
#2113301
07/19/16 02:24 PM
07/19/16 02:24 PM
|
Joined: Jan 2003
Posts: 21,080 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,080
Niles , Ohio
|
We run nothing but Taylor Spiro Pros.Last set on my 12.5 440 went like 15 years.Still worked great but looked crappy.Oh yeah even on BBs and SBs with headers no melted boots.My kid did run a part sleeve on 7 because his 62 300s headerers were 2 1/8 and close.His were on 6 years when he sold the car.Rocky
Chrysler Firepower
|
|
|
Re: plug wires, top three or four brands?
[Re: gregsdart]
#2113317
07/19/16 02:43 PM
07/19/16 02:43 PM
|
Joined: Sep 2007
Posts: 1,893 Spahn Ranch
RMCHRGR
top fuel
|
top fuel
Joined: Sep 2007
Posts: 1,893
Spahn Ranch
|
X2 on the Taylors. I like the angled, molded boots seems they 'click' on better than some other brands and have the finger dimples to get them on and off with. No problem with spark at all.
'71 Duster '72 Challenger '17 Ram 1500
|
|
|
Re: plug wires, top three or four brands?
[Re: gregsdart]
#2113319
07/19/16 02:49 PM
07/19/16 02:49 PM
|
Joined: Jul 2004
Posts: 19,318 State of confusion
Thumperdart
I Live Here
|
I Live Here
Joined: Jul 2004
Posts: 19,318
State of confusion
|
Firecore then MSD..........If they're good enuff for Top Fuel, they're good enuff for anything..........
72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....
|
|
|
Re: plug wires, top three or four brands?
[Re: RMCHRGR]
#2113321
07/19/16 02:51 PM
07/19/16 02:51 PM
|
Joined: Nov 2007
Posts: 21,838 Kirkland, Washington
Pacnorthcuda
Too Many Posts
|
Too Many Posts
Joined: Nov 2007
Posts: 21,838
Kirkland, Washington
|
X2 on the Taylors. I like the angled, molded boots seems they 'click' on better than some other brands and have the finger dimples to get them on and off with. No problem with spark at all. x3 on the Taylors. Been running them for almost 30 years. I like the universal kit--the plug ends are molded on but you determine the length and attached the distributor end. Never a problem. I also took the white "TAYLOR" writing off them with lacquer thinner (looks much better)
|
|
|
Re: plug wires, top three or four brands?
[Re: RMCHRGR]
#2113322
07/19/16 02:54 PM
07/19/16 02:54 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
I have used Taylor, MSD.. Firecore would be up there also being they use them on TF engines that run mags... I havent used the Firecore YET but I was offered a set from Rich... but I havent measured the lengths I need... I went with the big Taylors(I think they were 12mm) but I didnt like the shielding on them.. it seemed loose... my last 2 sets of wires have been MSD 9.5mm(I think thats the size.. could be 10.5).. and I put wire looms on all my wires to keep them separated plus it looks neater
|
|
|
Re: plug wires, top three or four brands?
[Re: gregsdart]
#2113328
07/19/16 03:01 PM
07/19/16 03:01 PM
|
Joined: Jan 2005
Posts: 2,540 Milwaukee WI
TRENDZ
master
|
master
Joined: Jan 2005
Posts: 2,540
Milwaukee WI
|
I use Magnecore$ 10mm on anything with turbos(heat) and electronics. Been tempted to try Firecores, but it's hard to turn away from something that I know works. Have never had a failure with the Magnecores.
"use it 'till it breaks, replace as needed"
|
|
|
Re: plug wires, top three or four brands?
[Re: gregsdart]
#2113337
07/19/16 03:14 PM
07/19/16 03:14 PM
|
Joined: Aug 2011
Posts: 188 Middletown, Ohio
Joes66dart
member
|
member
Joined: Aug 2011
Posts: 188
Middletown, Ohio
|
We've been running moroso ultra 40 wires with the moroso sleeves on them for a while now and have never had a problem with them.
Last edited by Joes66dart; 07/19/16 03:16 PM.
|
|
|
Re: plug wires, top three or four brands?
[Re: gregsdart]
#2113348
07/19/16 03:23 PM
07/19/16 03:23 PM
|
Joined: Jan 2003
Posts: 6,266 Renton Washington
Triple Threat
master
|
master
Joined: Jan 2003
Posts: 6,266
Renton Washington
|
In no particular order
Firecore MSD Moroso Ultra 40 Taylor
-Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA
|
|
|
Re: plug wires, top three or four brands?
[Re: gregsdart]
#2113392
07/19/16 04:31 PM
07/19/16 04:31 PM
|
Joined: May 2008
Posts: 5,399 Aurora, Colorado
451Mopar
master
|
master
Joined: May 2008
Posts: 5,399
Aurora, Colorado
|
Normally, I just use the MSD wires. I just got some Accel 9000 for the ceramic plug boots, They seem OK, but don't fit the best with my setup. Maybe if they have a custom cut to fit kit where you can specify the ceramic end angles would be nice. I haven't had good luck with the Taylor wires. Initially they work good, but the covering is pretty soft, and I have pulled the plug ends off some when changing plugs. My headers also seem to cook the taylors more than the MSD wires, but as mentioned earlier, I burnt the MSD plug boot also, so went to the ceramic ends. Too bad Jacobs went out of business, they made decent plug wires too.
|
|
|
Re: plug wires, top three or four brands?
[Re: gregsdart]
#2113857
07/20/16 10:24 AM
07/20/16 10:24 AM
|
Joined: Jan 2003
Posts: 8,030 Tulsa OK
Bad340fish
master
|
master
Joined: Jan 2003
Posts: 8,030
Tulsa OK
|
I bought some summit brand ones for my GM coil packs that I am using. I went cheap because I wasn't sure what I was going to do at first. The Summit brand ones look and feel just like Taylors and are the Taylor Blue color. I have been happy with them.
68 Barracuda Formula S 340
|
|
|
Re: plug wires, top three or four brands?
[Re: gregsdart]
#2113873
07/20/16 10:39 AM
07/20/16 10:39 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Those that are only getting two years out of a set of MSD wires, what goes wrong? Are they 8.5 mm or bigger? I've got 5 years or more on my MSD wires.. still show good... now that I bought a new coil and moved it over to almost the left fender the coil wire is fairly long... I will see how long that last..its about 18" and being its firing all the time it will be the one to go first
|
|
|
|
|