who on here is GOOD with SB cams.. I have a fairly
big roller in my 416 which is a street/strip rod
thats for DW... now its injected witha a Holley
Dominator.. it made 590hp on the dyno but this is a
260/270 @50 with .640/.640on a 105 lsa installed at
the same.. it lopes real hard and tends to load the
plugs at idle.. been thinking something smaller on
duration and a larger LSA.. or maybe one of the injection
guys can help me out.. was thinking about leaning it out
at idle... any help is accepted... now its a W-2 on pump
gas.. on the street it runs WELL on 87 octane... its 10.4
compression.. I have W-5s that will go that will give me
10.8.... I need 7000 - 7200 rpm... I hit 7200 the
other day and it was still pulling HARD... but this cam
was a 8000+ cam... I dont know if I can have this
reground to a wider LSA or not... just would like
to calm the lope down some and help the idle