|
Re: Let's hear some W7,W8,and W9 builds
[Re: 340_Dart]
#1920505
09/27/15 11:33 AM
09/27/15 11:33 AM
|
Joined: Jul 2005
Posts: 428
wappinger falls new york
Jimi_Vignogna
mopar
|
mopar
Joined: Jul 2005
Posts: 428
wappinger falls new york
|
300" R3-W8 cfe sheet metal intake Holley 660 cfm carbs,cfe w8 heads 2.15"in 1.6"ex,jesels 1.75r , Weber belt drive , 8.900" deck ht., 2.90" stroke crank, 4.060" bore , 15.0 to 1 comp. Bullet .850" cam. Just shy of 2.4 hp per cube,(715hp) I have run as quick as 9.14@ 147.00 mph 1.23 60' in a 3000# car. I leave the line at 6500, 1-2 shift 9700 2-3 shift 9900, trap is 10,200-10,500 depending on weather .
Last edited by Jimi_Vignogna; 09/27/15 11:43 AM. Reason: add pics
|
|
|
Re: Let's hear some W7,W8,and W9 builds
[Re: 340_Dart]
#1920640
09/27/15 02:47 PM
09/27/15 02:47 PM
|
Joined: Jan 2003
Posts: 4,448
Phoenix, AZ
MoparBilly
master
|
master
Joined: Jan 2003
Posts: 4,448
Phoenix, AZ
|
I read all these and think, "Wow, I wish my small block made that kind of power!" Then I read the shift and peak hp rpms and think, "Wow, I don't want my small block turning any where near that fast!"
"Livin' in a powder keg and givin' off sparks"
4 Street cars, 5 Race engines
|
|
|
Re: Let's hear some W7,W8,and W9 builds
[Re: 69 lawndart]
#1921033
09/28/15 04:41 AM
09/28/15 04:41 AM
|
Joined: Feb 2009
Posts: 1,019
Finland
mafo
super stock
|
super stock
Joined: Feb 2009
Posts: 1,019
Finland
|
Mine is:
R3 4.185 x 3.55
MGP rods
15.0:1
T&D 1.75 rockers
LSM cam 280/296 875/840 lift
PAC springs
CFE W8
CFE tunnelram, davinci dominators
1 7/8 step headers with 3" merge collectors
Moroso oil pump, home made pan to fit stock K member
and steering
fuel is VP MS109 unleaded
-65 Valiant,420", all motor,2700#, dot tires, 8,42 @ 160,2
|
|
|
Re: Let's hear some W7,W8,and W9 builds
[Re: 340_Dart]
#2382171
10/04/17 11:58 PM
10/04/17 11:58 PM
|
Joined: Jan 2003
Posts: 11,710
Portage,michigan
B3422W5
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 11,710
Portage,michigan
|
Scottb...... you should post your new build
69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, 10.40 @127 1/4
1.41 best 60 foot
6.60 at 103.90 1/8
|
|
|
|
|
9.20 R3 4" Molnar crank and 6" rod. Brett's W8 heads .750 lift 264-272 @ .050. Mopar 598 running a 4150 carb which is around 900 cfm. I'm having plenty of fun with the combo although it's down right now as the 5800 converter flash was too low and the 4.30 gear is getting changed to a 4.56 since I have a set. Dyno peaked 770hp @ 7200. All pulls were made using a QF 1050 dominator. Best so far is 9.43 @ 143. I've also gone 9.46 in Vegas which I was pleased with. Engine on the mild side and should give us great service! I've had the shift light set at 6800 so the 1-2 has been shifting at 7500, and the 2-3 at 7100. Trap rpm is 7000-7100. 
