Re: Edelbrock Victor SB Heads
[Re: 1Fast340]
#1826823
05/14/15 07:54 PM
05/14/15 07:54 PM
|
Joined: Apr 2007
Posts: 1,390 CA.
RAY1969CARS
pro stock
|
pro stock
Joined: Apr 2007
Posts: 1,390
CA.
|
I have a few things to say We need blocks with the Edelbrock having a huge intake valve and the bore is going to have to be huge I don't see that happening with the stock block especially with the power Number two if you do you have an aftermarket blocks at the very least you're running W-2s or and Indy head Everyone else would be running a W8 or 9 I just don't see anybody giving a W 8 for this at a eddy head I'm sure it is a cheaper deal rocker arms headers and intakes etc. i'm not even sure if they fit a 48° Which I would think is 75% of the blocks out there I don't know
Last edited by RAY1969CARS; 05/14/15 07:55 PM.
|
|
|
Re: Edelbrock Victor SB Heads
[Re: Porter67]
#1871168
07/15/15 09:54 PM
07/15/15 09:54 PM
|
Joined: Jan 2003
Posts: 5,486 SoCal
Brian Hafliger
master
|
master
Joined: Jan 2003
Posts: 5,486
SoCal
|
They've been pushed back yet again...
Brian Hafliger
|
|
|
Re: Edelbrock Victor SB Heads
[Re: Brian Hafliger]
#1871204
07/15/15 10:43 PM
07/15/15 10:43 PM
|
Joined: Feb 2005
Posts: 20,200 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,200
PA.
|
I'm glad I finally grabbed a set of 360-1 Indy heads. Had them on my bench again today and the numbers are looking real good.
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: Edelbrock Victor SB Heads
[Re: Porter67]
#1871226
07/15/15 11:18 PM
07/15/15 11:18 PM
|
Joined: Feb 2005
Posts: 20,200 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,200
PA.
|
I just got a new untouched set of 360-1s and wanted to ask the same thing.. How good are they? . I hate to post numbers on this site but I will say they are 300 cfm@.500 with an indy intake bolted on. I had the intake on the flowbench 3 more times today with another 5 hours of porting to get it there. What some guys don't understand is I'm retired so I'm in my shop everyday playing. Airspeed is very fast in this head requiring lots of playing as it was pegging my airspeed gauge at 401 FPS the whole way across the short side. Still not happy with the exhaust at 220 plus but airspeed is looking good
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: Edelbrock Victor SB Heads
[Re: WHITEDART]
#1871315
07/16/15 01:11 AM
07/16/15 01:11 AM
|
Joined: Feb 2005
Posts: 20,200 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,200
PA.
|
Nice are those RP 360-1 or std. . Standard but they are raised now. Lol
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: Edelbrock Victor SB Heads
[Re: pittsburghracer]
#1871317
07/16/15 01:14 AM
07/16/15 01:14 AM
|
Joined: Feb 2005
Posts: 20,200 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,200
PA.
|
I haven't poured a head in quite awhile but I may check these and make a mold for future reference. I love looking at a port in 3D
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: Edelbrock Victor SB Heads
[Re: pittsburghracer]
#1871323
07/16/15 01:18 AM
07/16/15 01:18 AM
|
Joined: Oct 2011
Posts: 3,036 bean town ....Ca
WHITEDART
master
|
master
Joined: Oct 2011
Posts: 3,036
bean town ....Ca
|
I would love to see the final product I have a set of RP'S that I am thinking of using on a 385cid dill
In the 8s N/A.with Brett miller W8's 5.07 at 133 at 2700lb
|
|
|
Re: Edelbrock Victor SB Heads
[Re: b1dartsport]
#1871386
07/16/15 04:38 AM
07/16/15 04:38 AM
|
Joined: Jan 2003
Posts: 5,486 SoCal
Brian Hafliger
master
|
master
Joined: Jan 2003
Posts: 5,486
SoCal
|
There are more than that...but it's no matter right now cause they are not in production yet.... Brian
Brian Hafliger
|
|
|
Re: Edelbrock Victor SB Heads
[Re: pittsburghracer]
#1871591
07/16/15 02:55 PM
07/16/15 02:55 PM
|
Joined: Feb 2005
Posts: 982 western pennsylvania
b1dartsport
super stock
|
super stock
Joined: Feb 2005
Posts: 982
western pennsylvania
|
I haven't poured a head in quite awhile but I may check these and make a mold for future reference. I love looking at a port in 3D John, I have a brand spanking new set of 360-2 230cc heads with the original design huge exhaust port. You are welcome to check them out if you want.-Randy
|
|
|
Re: Edelbrock Victor SB Heads
[Re: CJD AUTOMOTIVE]
#1871661
07/16/15 04:39 PM
07/16/15 04:39 PM
|
Joined: Sep 2008
Posts: 656 Florida
CJD AUTOMOTIVE
OP
mopar
|
OP
mopar
Joined: Sep 2008
Posts: 656
Florida
|
They are actually taking orders now. Summit finally has them listed. Talked to Eddy and was told by the end of the month. Never heard that before....
Craig Scholl CJD Automotive, LLC Jacksonville, FL www.CJDAUTOMOTIVE.com904-400-1802 "I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
|
|
|
Re: Edelbrock Victor SB Heads
[Re: CJD AUTOMOTIVE]
#1871687
07/16/15 05:22 PM
07/16/15 05:22 PM
|
Joined: Jan 2003
Posts: 11,728 Portage,michigan
B3422W5
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 11,728
Portage,michigan
|
I talked to the product engineer at Edelbrock about three weeks ago in charge of the heads. He stated they were already on the shelf, vendors would soon have pricing( about now was the time frame) and they will be offered fully CNC ported and assembled( different than prior offerings were going to be rolled out) They were in the process 3 weeks ago of getting flow numbers. They SHOULD be hitting right about now.
69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight 418 BPE factory replacement headed stroker, 565 lift solid cam Best so far, low 10.30’s 1/4 1.41 best 60 foot 6.56 at 104.17
|
|
|
Re: Edelbrock Victor SB Heads
[Re: CJD AUTOMOTIVE]
#1871710
07/16/15 05:51 PM
07/16/15 05:51 PM
|
Joined: Jan 2003
Posts: 9,826 las vegas
70AARcuda
master
|
master
Joined: Jan 2003
Posts: 9,826
las vegas
|
http://proshop.summitracing.com/parts/edl-617391902.00 each complete EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC ROLLER CAMSHAFT APPLICATIONS shippped 7/31 if ordered today...I left the year off
Tony
70 AARCuda Vitamin C 71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield) 71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas) 71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)
|
|
|
|
|